0 Cart
In Stock
Price

Product filters

In Stock
Price

$  –  $

  • $2
  • $50

Build Parts

Sort by Popularity
48 Per Page
Red Star Arms FCG Pin Retaining Plate
Quick view
$4.95
Red Star Arms FCG Pin Retaining Plate
If you haven't used one of these yet you're really missing out! This has to be the easiest and most hassle free way to install your fire control group in an...
In Stock
+ −
AK Center Support for 1mm Receivers
Quick view
$7.00
AK Center Support for 1mm Receivers
Based on the Bulgarian style center support these DO NOT HAVE THE FLAT on them. Other countries have a larger diameter center support with the...
In Stock
+ −
AK Barrel Pin
Quick view
$6.95
AKM Barrel Pin
Standard AKM barrel pins made from tool steel and heat treated like the originals. The dimensions of these were taken from Romanian barrel pins at .277....
In Stock
+ −
AK GRIP SCREW AND NUT, C3-71
Quick view
$7.95
AK Grip Screw and Nut
Hardware
This brand new production replacement grip screw and nut. 4" long.
In Stock
+ −
1.5mm Center Support and Rivet
Quick view
$7.00
1.5mm Center Support and Rivet
These are made from heat treated 4130 steel and the rivets are a copy of an original AK center support rivet. The length is shorter than the 1mm center...
In Stock
+ −
  • Save 12%
AK Disconnector Spring
Quick view
$3.49 $3.95
AK Disconnector Spring
New production AK47 disconnector spring.
In Stock
+ −
AK Hammer/Trigger Extended Length Axis Pin
Quick view
$3.49
AK Hammer/Trigger Extended Length Axis Pin
These axis pins are made to work with receivers as wide as 1.390" or 35.3mm. Made from heat treated tool steel for years of use then black oxided. This is...
In Stock
+ −
AK-Builder Lower Bolt Guide Rails
Quick view
$8.95
AK-Builder Lower Bolt Guide Rails
Get a set of the best US made rails available! These have mag stabilizers on both rails unlike any other rails made in the US.There are no holes drilled in...
In Stock
+ −
Trigger Guard Screw Plate
Quick view
$4.00
Trigger Guard Screw Plate
These trigger guard screw plates are perfect for test assembly for rivet builds or final assembly for screw builds. No need to take small nuts and grind...
In Stock
+ −
M92/M85 PAP PISTOL MUZZLE DETENT SET, C6-51
Quick view
$14.95
M92/M85 PAP Pistol Muzzle Detent Set
These detent sets are for the PAP M92/M85 pistols that were shipped without them installed.  Made from 4140 steel and finished with black oxide....
In Stock
+ −
BLACK AK RECOIL BUFFER, A3-21
Quick view
$10.95
Black AK Recoil Buffer
Slides over spring assembly with no disassembly required! Not the hard plastic buffers like the others.
In Stock
+ −
AK-BUILDER AK PISTOL GRIP NUT, C3-73
Quick view
$5.25
AK-Builder AK Pistol Grip Nut
This is a copy of an original Polish grip nut that goes on the inside of the receiver. If you are buying a Hogue or any other grip that uses a short screw...
In Stock
+ −
AK-BUILDER FRONT SIGHT & GAS BLOCK SUPPORT, C8-11
Quick view
$29.95
AK-Builder Front Sight & Gas Block Support
Here is a tool that we have been using to demill and populate our parts kits.  This is made to support the AKM gas block and front sight while...
In Stock
+ −
AK PISTOL GRIP SCREW, C3-74
Quick view
$4.00
AK Pistol Grip Screw
Original length grip screw for attaching the standard style pistol grips.
In Stock
+ −
  • Save 12%
3mm Retainer Pin, Front Sight & Gas Block to Barrel
Quick view
$2.89 $3.29
3mm Retainer Pin Front Sight & Gas Block to Barrel
New 3mm Retainer Pin, Front Sight & Gas Block to Barrel. Sold Individually.
In Stock
+ −
NEW SURPLUS AK STOCK SCREW, C7-51
Quick view
$3.25
New Surplus AK Stock Screw
This is for ONE screw not a set of two.  These are original brand new parts not reproduction copies. This screw is for holding the stock in the rear...
In Stock
+ −
AK47 BULLET GUIDE RIVET, A3-12
Quick view
$3.25
AK47 Bullet Guide Rivet
This rivet is used for installing the bullet guide onto a trunnion.
In Stock
+ −
AK-BUILDER MAG CATCH SPRING, A2-25
Quick view
$2.50
AK-Builder Mag Catch Spring
New production magazine catch spring.
In Stock
+ −
AK47 FRONT SIGHT DETENT NEW, B4-51
Quick view
$5.95
AK47 Front Sight Detent New
These were made like the Romanian and AMD detents and should fit any standard front sight that uses a 14mm threaded muzzle.  THIS WILL NOT FIT AN M92,...
In Stock
+ −
AK-BUILDER SELECTOR STOP, A2-21
Quick view
$8.95
AK-Builder Selector Stop
New production selector stops made from 4130 chromoly steel. The machining has been done on this piece to just drop in on a receiver with the correct...
In Stock
+ −
  • Save 33%
SINGLE POINT AK SLING ADAPTER PLATE, E2-34
Quick view
$19.95 $29.95
Single Point AK Sling Adapter Plate
Sling mount attaches under the pistol grip as pictured.  Sling can be attached to either side of the rifle. Made from steel.
In Stock
+ −
  • Save 16%
AK-BUILDER MAG CATCH PIVOT PIN, A2-24
Quick view
$2.95 $3.50
AK-Builder Mag Catch Pivot Pin
New production magazine catch pivot pin. 5mm diameter.
In Stock
+ −
  • Save 13%
NEW STAINLESS AK47 FLAT FIRING PIN, C5-62
Quick view
$12.95 $14.95
New Stainless AK47 Flat Firing Pin
Flat AK-47 7.62X39 firing pin made of stainless steel then heat treated. Made in the USA. These are black nitrided. Length is 3.282".
In Stock
+ −
  • Save 20%
AK-Builder Undrilled AK Trigger Guard
Quick view
$12.00 $15.00
AK-Builder Undrilled AK Trigger Guard
New production trigger guard made from .063" 4130 steel with a black oxide finish. These were made to fit the standard AKM receivers, but can still be used...
In Stock
+ −
PSL Brass Barrel Press Puck
Quick view
$9.95
PSL Brass Barrel Press Puck
The PSL Brass Barrel Press Puck is used to press the PSL barrel out of the front trunnion. DO NOT use the other brass nut we sell for the other barrels we...
In Stock
+ −
AK-BUILDER M92/M85 PAP PISTOL SLING MOUNT KIT, G7-61
Quick view
$34.95
AK-Builder M92/M85 PAP Pistol Sling Mount Kit
AK-Builder M92/M85 PAP Pistol Sling Mount Kit Kit Includes: (1) M92/M85 PAP Sling Mount Bracket (2) 8-32 x 1/8" Alloy Steel Socket Head...
In Stock
+ −
4MM RETAINER PIN FOR REAR SIGHT BLOCK, C4-62
Quick view
$3.29
4mm Retainer pin for rear sight block
4mm Retainer pin for rear sight block.
In Stock
+ −
AK SPRING MAINTENANCE KIT FOR AK-47/AK-74, H1-61
Quick view
$49.95
AK Spring Maintenance Kit For AK-47/AK-74
AK Spring Maintenance Kit For AK-47/AK-74 This 8-Spring Kit Includes: 1-Hammer Retarder Spring 1 - Recoil Spring 1 - Hammer Trigger Spring...
In Stock
+ −
RIVET FOR TRIGGER GUARD REAR AK-74 TYPE, C4-31
Quick view
$3.25
Rivet for Trigger Guard Rear AK-74 type
Rivet for Trigger Guard, Rear, AK-74 type. The only reason you would need to use this rivet is for an original AK74 trigger or if you are using an...
In Stock
+ −
NEW US MADE AK HAMMER SPRING, C2-41
Quick view
$9.95
New US made AK Hammer Spring
New US made AK47 AK74 Hammer Spring.
In Stock
+ −
AK-BUILDER SIGHT & GAS BLOCK PIN PUNCH SET, B6-51
Quick view
$49.95
Ak-Builder Sight & Gas Block Pin Punch Set
We designed these punches for demilling parts kits in our shop and use them daily. These can be bought as a set or individually.  The set comes with a...
In Stock
+ −
NEW AK FRONT SIGHT POST ORIGINAL STYLE, C10-41
Quick view
$5.45
New AK Front Sight Post Original Style
New US made original style front sight post.  These are made of heat treated steel and black oxided.
In Stock
+ −
YUGO M70-PAP AMBI SLING MOUNT, E4-31
Quick view
$22.95
Yugo M70-PAP Ambi Sling Mount
Yugo M70-PAP Ambi Sling Mount. Will also work with M92, M85 pistols or other variants with a rivet on pistol grip nut. Will NOT work on an underfolder....
In Stock
+ −
  • Save 33%
AK Single Point AK Sling Adapter Plate
Quick view
$19.95 $29.95
AK Pistol Single Point AK Sling Adapter Plate
Sling mount attaches under the pistol grip as pictured.  Made from steel. THIS IS NOT MADE TO FIT THE M92 PAP PISTOL.
In Stock
+ −
East German AK Magazine Catch
Quick view
$10.95
East German AK Magazine Catch
East German magazine catch.
In Stock
+ −
NEW AK FRONT SIGHT POST ROUND .050 DIAMETER TIP, C11-11
Quick view
$8.45
New AK Front Sight Post Round .050 Diameter Tip
New US made original style front sight post with .050" round tip.  These are made of heat treated steel and black oxided.
In Stock
+ −
New AK Front Sight Post Round .075 Diameter Tip
Quick view
$8.45
New AK Front Sight Post Round .075 Diameter Tip
New US made original style front sight post with .075" round tip.  These are made of heat treated steel and black oxided.
In Stock
+ −
2.5mm Retainer Pin, YUGO Front Sight & Gas Block to Barrel
Quick view
$2.89
2.5mm Retainer Pin YUGO Front Sight & Gas Block to Barrel
2.5mm Retainer Pin, Front Sight & Gas Block to Barrel. Sold Individually.
In Stock
+ −
NEW SURPLUS AK STOCK SCREW FOR POLYMER STOCK, C7-52
Quick view
$3.25
New Surplus AK Stock Screw For Polymer Stock
New Surplus AK Stock Screw for Polymer Stock. This screw is for holding the stock in the rear trunnion. 
In Stock
+ −
AK-BUILDER FRONT SIGHT WINDAGE ADJUSTMENT BASE, B5-71
Quick view
$7.50
AK-Builder Front Sight Windage Adjustment Base
One Groove
New production bases for replacing old parts or for assembling new front sights. These are made from 4140 and heat treated then black oxided. Your...
In Stock
 
Select an option
  • Out of stock
AK Recoil Spring Retainer
Quick view
$4.49
AK Recoil Spring Retainer
Brand new AK Recoil spring retainer.
No products with the selected options in stock
NEW AK-74 Oversized Barrel Pin
Quick view
$5.95
AK-74 Oversized Barrel Pin .302
This barrel pin is .302" in diameter. These are heat treated like the originals. Use a 7mm drill to open the hole and then a .300 reamer to make the...
In Stock
+ −
AK-BUILDER BERYL STOCK RETAINING BRACKET, G7-41
Quick view
$19.95
AK-Builder Beryl Stock Retaining Bracket
AK-Builder Beryl Stock Retaining Bracket We checked several stocks and the slots were different depths, so the tabs on the bracket are left oversized -...
In Stock
+ −
AK-Builder Lower Bolt Guide Yugo Rails
Quick view
$10.95
AK-Builder Lower Bolt Guide Yugo Rails
Get a set of the best US made rails available! These have mag stabilizers on both rails unlike any other rails made in the US.There are no holes drilled in...
In Stock
+ −
AK-BUILDER RPK 47 LOWER BOLT GUIDE RAILS, E0-11
Quick view
$9.95
AK-Builder RPK 47 Lower Bolt Guide Rails
These rails are made like the originals that didn't use mag dimples on the receiver.  These are made from 4130 steel and are not heat treated.
In Stock
+ −