5mm & 7mm Reamer Set

CODE: A2-31

 5mm and 7mm reamers for finishing the hammer and trigger holes on my flats. These will ensure that you have perfectly round holes for the axis pins to... More

12mm x 1.25mm Gas Piston Tap

CODE: C2-11

12mm x 1.25mm tap for cleaning up the threads on the bolt carrier when installing a new gas piston. Made of high speed steel for long life.

5/32" .1563" Screw Machine Drill Bit

CODE: C1-72

These are the same drills I use in the Rivet Drilling tool, drilling gas piston rivet holes and for drilling holes for the 4mm rivet holes in receivers.... More

#16 .172" Screw Machine Drill Bit

CODE: C1-71

This drill is used for drilling holes for the 4.5mm rivet holes in the bent receivers as well as opening the hammer pin hole on my flats before reaming to... More

7mm Screw Machine Drill Bit

CODE: C1-73

US Made by Precision Twist Drill Screw Machine - Drills Size: 0.2756 In., 7.00 mm Flute Length: 1-11/32, 34 mm Overall Length: 2-29/32, 74 mm... More

Gas Port Drill Bit

CODE: C7-21

These are the drill bits I use for drilling gas ports.  These will fit into the port and it will guide the drill.  Just press the gas block on... More

3mm Screw Machine Drill Bit

CODE: C7-22

Material: HSS Screw Machine - Drills Size: 0.1181 In 3.00 mm Flute Length: 5/8, 16 mm Overall Length: 1-13/16, 46 mm Finish/Coating: Black... More

4mm Screw Machine Drill Bit

CODE: C7-23

HSS Screw Machine - Drills Size: 0.1575 In., 4.00 mm Flute Length: 7/8, 22 mm Overall Length: 2-5/32, 55 mm Finish/Coating: Black Oxide Point... More

5mm Screw Machine Drill Bit

CODE: C7-24

HSS Screw Machine - Drills Size: 0.1969 In., 5.00 mm Flute Length: 1-1/32, 26 mm Overall Length: 2-7/16, 62 mm Finish/Coating: Black Oxide... More

AK Trunnion Rivet Hole Drilling Fixture


$74.95   $65.00
Here is a professional tool for drilling the front and rear trunnion holes in AK47 receivers.  This tool will work with 7.62 and 5.45 trunnions... More
  • 7.62 Red Mandrel 
  • 5.45 Blue Mandrel 
  • 7.62 Red and 5.45 Blue Mandrels (+$15.00)

M12x1.25 Gas Piston Die

CODE: C4-21

This die will fix damaged threads on gas pistons as well as put new threads on custom made pistons.

.300 Barrel Pin Reamer

CODE: A2-32

This is the same reamer we use to work with the .302 barrel pin holes.  Drill the hole first with a 7mm drill then ream the hole.  The reamer has... More

.314 Reamer

CODE: A2-33

Use this reamer for the .315 oversize barrel pins.  Start with the hole drilled at 7mm then switch to the reamer.

Cobalt Gas Port Drill for Bulgarian AK74's

CODE: C4-23

This drill is .076" and the original port size is .077". More than likely with a cheap drill press or hand drill the bit will cut oversize so it won't... More

Die Handle for 1.5" Threading Dies

CODE: C3-51

This is used with our 14-1LH and 12-1.25 dies sold on the website.
51 item(s)

Die Starter 14-1 LH

CODE: A4-13

Die Starter for 14-1 LH 7.62x39 rifles.
55 item(s)

AK-Builder Receiver Blank Drilling Fixture 7.62 & 5.45

CODE: I1-12

AK-BUILDER Receiver Blank Drilling Fixture This tool is made specifically for the Polish 7.62 x 39 and 5.45 x 39 receiver blanks that were just... More

#21 Screw Machine Drill Bit

CODE: C4-22

#21 Screw Machine Drill Bit