0 Cart
C5-13
In Stock

Two Inch Capacity C-Clamp

$4.95
Write a review
+ −
Add to wish list Compare
Two inch capacity C-clamp, dark blue painted body, metallic clamping screw.

Two Inch Capacity C-Clamp

$4.95

Two inch C-Clamp for clamping trunnions for test fitting parts to your rifle before final installation.

Angled view of AK-Builder steel Rail Alignment Fixture showing front clamp and screw.
$29.95
AK-Builder Rail Alignment Fixture

AK-Builder rail alignment fixture — positions and clamps lower bolt guide rails in stamped receivers for accurate welding and alignment.

C3-61
In Stock
+ −
AK-Builder AK Trunnion Rivet Hole Drilling Fixture with red 7.62mm and blue 5.45mm mandrels.
$99.95
AK Trunnion Rivet Hole Drilling Fixture
Here is a professional tool for drilling the front and rear trunnion holes in AK47 receivers.  This tool will work with 7.62 and 5.45 trunnions...
T3-11
In Stock
 
Select an option
Angled view of two uncoated high-speed steel 5mm and 7mm reamers for AK receiver pins.
$44.95
5mm & 7mm Reamer Set

5 mm and 7 mm reamer set for finishing AK hammer and trigger pin holes. Use slow speed with cutting oil.

A2-31
In Stock
+ −
Small blue one-inch capacity C-clamp with metallic screw.
$3.75
One Inch Capacity C-Clamp
Small C-Clamp for installing the lower rails in your receiver or for clamping the scribe jig to the bent receiver to mark the cutouts of the top rail.
C5-12
+ −
RIVET HEAD DRILLING TOOL, B6-31
$37.95
Rivet Head Drilling Tool

Rivet head drilling tool — heat-treated steel, includes 5/32" drill bit. Designed for removing trunnion rivets from AK parts kits.

B6-31
In Stock
+ −
AK-Builder Trigger Guard Riveting Jig, black oxide finish, with detached components.
$85.00
AK47 Trigger Guard Riveting Jig

Installs all five trigger guard rivets with precision—front four at once, rear separately. Magnetic rear support and an adjustable/removable rear block fit multiple AK variants; compatible with receivers that already have center support and rails.

T1-11
In Stock
+ −

No reviews found

Customers Also Bought

Angled view of AK-Builder steel Rail Alignment Fixture showing front clamp and screw.
AK-Builder Rail Alignment Fixture
$29.95
AK-Builder AK Trunnion Rivet Hole Drilling Fixture with red 7.62mm and blue 5.45mm mandrels.
AK Trunnion Rivet Hole Drilling Fixture
$99.95
Select an option
Angled view of two uncoated high-speed steel 5mm and 7mm reamers for AK receiver pins.
5mm & 7mm Reamer Set
$44.95
Small blue one-inch capacity C-clamp with metallic screw.
One Inch Capacity C-Clamp
$3.75
RIVET HEAD DRILLING TOOL, B6-31
Rivet Head Drilling Tool
$37.95
AK-Builder Trigger Guard Riveting Jig, black oxide finish, with detached components.
AK47 Trigger Guard Riveting Jig
$85.00
AK-Builder Bulgarian-style center support sleeve and rivet for 1mm receivers, heat treated alloy steel.
AK Center Support for 1mm Receivers
$7.00
AK-Builder AK Rivet Set, black oxide coated, showing various lengths and head styles.
AK-Builder AK Rivet Set
$9.00
Select an option
AK-Builder Barrel Press Kit components: black oxided rams, brass block, and trunnion blocks.
AK-Builder Barrel Press Kit
$139.95
Select an option
AK-Builder riveting press, black-finished, showing main unit, assorted dies and supports.
AK-Builder Rivet Tool
$270.00
Close-up of AK-Builder Spot Welder Tong with screw-on tip welding an AK receiver rail.
Spot Welder Tong
$39.95
5/32" .1563" SCREW MACHINE DRILL BIT, C1-72
5/32" .1563" Screw Machine Drill Bit
$2.95