0 Cart
C7-21
In Stock

Gas Port Drill Bit

GAS PORT DRILL BIT, C7-21

Gas Port Drill Bit

$8.95

These are the drill bits I use for drilling 7.62 gas ports.  These will fit into the port and it will guide the drill.  Just press the gas block on first.  This works on the Romanian and AMD65 style (45 degree)gas blocks.  The Bulgarian 74 gas port holes are smaller and need a shorter drill bit.

Size: 0.1285"

Wire #30

Flute Length: 1-5/8"

Overall Length: 6"

Material: Cobalt

Point Angle°: 135

$44.95

5 mm and 7 mm reamer set for finishing AK hammer and trigger pin holes. Use slow speed with cutting oil.

A2-31
In Stock

$14.00
PSL/FPK
The new long rear trunnion rivets have a slightly shorter head and the cupped tool that supports the rivets will need to be sanded down to keep the...
A0-11
In Stock
 

$36.95
This is the same reamer we use to work with the .302 barrel pin holes.  Drill the hole first with a 7mm drill then ream the hole.  The reamer has...
A2-32

$4.95

Original Red Star Arms retaining plate — heat-treated steel, installs in seconds, replaces wire retainer, fits most AKs.

A1-21
In Stock

$37.95

Rivet head drilling tool — heat-treated steel, includes 5/32" drill bit. Designed for removing trunnion rivets from AK parts kits.

B6-31
In Stock

$2.95
These are the same drills I use in the Rivet Drilling tool, drilling gas piston rivet holes and for drilling holes for the 4mm rivet holes in receivers....
C1-72

No reviews found