0 Cart
D7-41
In Stock

AIMS-74 NITRIDE barrel 5.45 x 39

$149.95
Write a review
+ −
Add to wish list
AK-Builder AIMS-74 5.45x39 nitride barrel, 4150v CrMoV steel, with machined cuts.

AIMS-74 NITRIDE barrel 5.45 x 39

$149.95

These USA new production AIMS-74 barrels are copies from a factory original Romanian Military AIMS-74 take off.  We are making these in house out of 4150v CrMoV barrel blanks then sending out for nitride.  The AK-Builder AIMS-74 barrels have the extractor cuts, and handguard retainer cuts pre-machined.  We have also dimpled the gas hole, but it is NOT drilled through. 

We suggest measuring the bore of your front trunnion before ordering.  The standard press fit size is 0.908".  Many of the parts kits brought into the country where oversized, therefore you may need an "oversized" barrel. Oversized barrels measure 0.920". Measuring before you buy will save you money in shipping.

This item is made in the United States and counts as a 922r compliant part.

Journal Size:
Standard
AK-Builder AK Rivet Set, black oxide coated, showing various lengths and head styles.
Quick view
$14.00
AK-Builder AK Rivet Set
PSL/FPK
The new long rear trunnion rivets have a slightly shorter head and the cupped tool that supports the rivets will need to be sanded down to keep the...
A0-11
In Stock
 
Select an option
Red Star Arms FCG pin retaining plate, dark heat-treated steel, side view.
Quick view
$4.95
Red Star Arms FCG Pin Retaining Plate

Original Red Star Arms retaining plate — heat-treated steel, installs in seconds, replaces wire retainer, fits most AKs.

A1-21
In Stock
+ −
AK-BUILDER ROMANIAN/POLISH AKM SCOPE RAIL, B6-11
Quick view
$34.95
AK-Builder Romanian/Polish AKM Scope Rail
These fit the standard Romanian/Polish style rear trunnions that have the two long rivets going through the rear trunnion.  Includes two short rivets...
B6-11
In Stock
+ −
AK-Builder AK74 5.45x39 receiver flat, 4130 annealed, in the white, with 5.45 magwell dimples.
Quick view
$45.95
AK74 5.45x39 Fixed Stock Receiver Flat
With Y & I Embossing, 1mm
This flat has the magwell and mag dimples to match the 5.45 magazines which are narrower then 7.62 mags.  There are no front or rear trunnion holes....
B2-41Y
In Stock
 
Select an option
AK-BUILDER MAG CATCH SPRING, A2-25
Quick view
$2.50
AK-Builder Mag Catch Spring
New production magazine catch spring.
A2-25
In Stock
+ −
Angled view of two uncoated high-speed steel 5mm and 7mm reamers for AK receiver pins.
Quick view
$44.95
5mm & 7mm Reamer Set

5 mm and 7 mm reamer set for finishing AK hammer and trigger pin holes. Use slow speed with cutting oil.

A2-31
In Stock
+ −

No reviews found

Customers Also Bought

AK-Builder AK Rivet Set, black oxide coated, showing various lengths and head styles.
AK-Builder AK Rivet Set
$14.00
Select an option
Red Star Arms FCG pin retaining plate, dark heat-treated steel, side view.
Red Star Arms FCG Pin Retaining Plate
$4.95
AK-BUILDER ROMANIAN/POLISH AKM SCOPE RAIL, B6-11
AK-Builder Romanian/Polish AKM Scope Rail
$34.95
AK-Builder AK74 5.45x39 receiver flat, 4130 annealed, in the white, with 5.45 magwell dimples.
AK74 5.45x39 Fixed Stock Receiver Flat
$45.95
Select an option
AK-BUILDER MAG CATCH SPRING, A2-25
AK-Builder Mag Catch Spring
$2.50
Angled view of two uncoated high-speed steel 5mm and 7mm reamers for AK receiver pins.
5mm & 7mm Reamer Set
$44.95
AK-Builder Bulgarian-style center support sleeve and rivet for 1mm receivers, heat treated alloy steel.
AK Center Support for 1mm Receivers
$7.00
Close-up of drilled .076" gas port on Bulgarian AK74 gas block.
Cobalt Gas Port Drill for Bulgarian AK74's
$4.95
Save 18% Yugo M70 16" NON CHROME LINED 7.62 x 39 Barrel
16" Yugo M70 7.62x39 US Non-Chrome Barrel
$169.95 $139.95
Select an option
AK-74 SCOPE RAIL RIVETS, C12-64
AK-74 Scope Rail Rivets
$3.95
GAS PORT DRILL BIT, C7-21
Gas Port Drill Bit
$8.95
Angled view of parkerized Bulgarian triangle sidefolding stock with 4130 steel trunnion and pins.
Triangle Sidefolding Stock Set
$199.95