0 Cart

Product filters

In Stock
Price

$  –  $

  • $12
  • $280

922r Compliance Parts

$12.00
14x1mm LH

AK-Builder Slant Brake

In Stock

$12.50
14x1mm LH
US made barrel nut which may or may not be considered a 922r part, but in case it is ever questioned then you are covered.The size of this part was taken...
In Stock

  • Save 50%
AK-BUILDER.COM SAIGA 12 SHOTGUN PISTON, N-42
$14.95 $29.95
CNC machined from 4140 steel then heat treated and hard chrome plated. This counts as one part towards 922r compliance.     This...
In Stock

  • Save 6%
AK-BUILDER AK47 STANDARD GAS PISTON, A2-51
$16.50 $17.50
Comes with rivet pictured below * 6.25" length * Made from hardened Stainless Steel * U.S. Sec 922r compliant part * Made in the U.S.A. * Roll Stamped...
In Stock

  • Out of stock
US MADE HUNGARIAN AMD 65 GAS PISTON, A2-53
$17.50
Made from stainless steel then heat treated. The only other AMD 65 pistons on the market are softer non-heat treated ones. Comes with rivet for...
No products with the selected options in stock

$17.50
14x1mm LH
Inspired by the highly effective RPK brake found on the AK’s big brother, the AK Slot Brake provides improved styling and helps dampen recoil. Machined from...
In Stock

  • Out of stock
7.62 Krink 14-1 Flash Hider
$18.95
14x1mm LH
Made to give you the look of the Krink with 14-1 left hand threads for standard AK's. Made of steel and black oxided Stamped with USA Overall...
No products with the selected options in stock

$22.50
These pistons will fit standard length AK74 rifles as well as the Polish Tantal. NOT for the Romanian AIMS 74, use the AK47 piston. 6.375". Made from...
In Stock

$24.50
14x1mm LH
AK-47 Phantom Flash Hider with 14-1 Left Hand Threads. Made from 4140 steel, marked USA and black oxided. 2.25" long / 2.3 oz.   This item...
In Stock

  • Save 31%
AMD 65 EXTENDED MUZZLE BRAKE - SMOOTH, H7-61
$25.00 $36.00
14x1mm LH
Extended AMD 65 Muzzle Brake - Smooth Body (No machined Vent Holes). These are 4.3" long and made from 4140 steel to bring the barrel length of the rifle to...
In Stock

$26.95
Black, Pistol Grips
Hogue overmolded pistol grip for AK variants. US Made and counts towards one part of your 922r compliance.     This item is made in the...
In Stock
 

  • Save 25%
  • Out of stock
AMD 65 EXTENDED MUZZLE BRAKE, C4-51
$29.95 $40.00
14x1mm LH
Extended AMD 65 Muzzle Brake 4.3" long/ 7.1 oz.  is made from 4140 steel to bring the barrel length of the rifle to 16".  Threads are 14-1 left...
No products with the selected options in stock

$29.95
26mm LH
These are new Yugo M92 flash hiders that have never been installed on a rifle.  Made from 4140 steel and black oxided.  We made these in 26mm LH...
In Stock

  • Out of stock
AK SPIKED MUZZLE BRAKE/COMPENSATOR, B5-11
$29.95
14x1mm LH
USA Spiked Muzzle Brake/Compensator for AK's. Multi Port "Fish Bone" Compensator Door Breacher Spike Points All Steel Construction 14-1 LH...
No products with the selected options in stock

$29.95
14x1mm LH
AK-47 Phantom Flash Hider with Twist Slots Threaded 14-1 Left Hand Twist Made of steel and black oxided. 2 3/16" long/ 1.9 oz.   This...
In Stock

  • Save 14%
Guntec USA AK-47 Phantom Flash Hider with Twist Slots 14-1 LH
$29.95 $34.95
1/2-28 AR15
Very aggressive and sharp pointed flash hider made from 4140 steel and black oxided.  Choice of either AK pattern 14-1lh threads or AR15 1/2-28...
In Stock
 

$29.95
1/2-28
USA Spiked Muzzle Brake/Compensator for AR15's. Multi Port "Fish Bone" Compensator Door Breacher Spike Points 4140 Steel with black oxide...
In Stock

  • Save 46%
FAKE SUPPRESSOR 1/2-28 RH 4.375" LONG, J4-22
$29.95 $55.00
1/2-28
Made in USA Aluminum 6061 barrel extension with 1/2-28  threads.  4.375" long and 1.180" in diameter with a .4" bore. 6.4 oz. Hard anodized...
In Stock

  • Save 46%
FAKE SUPPRESSOR 5/8-24 RH 4.375" LONG, J4-42
$29.95 $55.00
5/8-24
Made in USA Aluminum 6061 barrel extension with 5/8-24  threads.  4.375" long and 1.180" in diameter with a .4" bore. 6.2 oz. Hard anodized...
In Stock

$30.00
26mm LH
These Barrel Sleeves are made for our barrel extensions to be threaded on to cover up the metal extension.  The rear is not threaded, but the...
In Stock
 

$33.80
US Made Gas Piston for Krinkov 7.62x39, 5.45x39 and 5.56x45.  This will not fit an M92, these are for Bulgarian or Russian rifles. 922r Compliant...
In Stock

$34.95
26mm LH
This flash hider is made to fit the Yugo M92/M85 pistols that are on the market.  Made from 4140 steel and black oxided. 2.73" long / 4.6 oz....
In Stock

  • Out of stock
AK FAKE SUPPRESSOR 24MM 5" LONG, L1-51
$34.95
24mm
The engraving on these is on both sides and timed with the detent so it will show correctly on both sides.  Made in USA, 7.8 oz. Aluminum 6061...
No products with the selected options in stock

  • Save 20%
AK Fake Suppressor 14-1 LH 4" Long
$43.95 $55.00
14x1mm LH
Made in USA Aluminum 6061 barrel extension with 14-1 LH threads.  4.3" long and 1.180" in diameter with a .4" bore. 6.4 oz. Hard anodized black...
In Stock

$44.95
24mm
The engraving on these is on both sides and timed with the detent so it will show correctly on both sides.  Made in USA, 7.8 oz. Aluminum 6061...
In Stock

$48.95
Blank Only, 1mm
NEW Bent Receiver Blanks - 80% Complete These come with the lower bolt guide rails, but are not installed Just like our fixed stock 7.62...
In Stock

$49.95
14x1mm LH
Made in USA Aluminum 6061 barrel extension with 14-1 LH threads.  5.5" long and 1.180" in diameter with a .4" bore. Hard anodized black and laser...
In Stock

$49.95
26mm LH
This is our short version of the M92/M85 barrel extension that is only 5" long.  These will not work for making the 10" barrel to the 16" length....
In Stock

$49.95
14x1mm LH
Made in USA Aluminum 6061 barrel extension with 1/2- 28 RH threads.  5.5" long and 1.180" in diameter with a .4" bore. Hard anodized black and...
In Stock

$49.95
14x1mm LH
Made in USA Aluminum 6061 barrel extension with 5/8- 24 RH threads.  5.5" long and 1.180" in diameter with a .4" bore. Hard anodized black and...
In Stock

$54.95
14x1mm LH
New production flash hiders made from 4140 steel and black oxided. 3.69" long / 3.5 oz. / opening is .438". 14-1 left hand threads and should fit any...
In Stock

$54.95
26mm LH
This is our short version of the M92/M85 barrel extension that is only 5" long.  These will not work for making the 10" barrel to the 16" length....
In Stock

$59.95
USA, Blank Only, 1mm
NEW Bent Receiver Blanks - 80% Complete Just like our Bulgarian 5.45 receiver flat, without the fire control group holes these are bent and ready to...
In Stock
 

$59.95
USA, Blank Only, 1mm
NEW Bent Receiver Blanks - 80% Complete Just like our Khyber Pass 7.62 receiver flat, without the fire control group holes these are bent and ready...
In Stock
 

  • Save 60%
PWS CQB 74 5.45X39 MUZZLE BRAKE 24MM X 1.5MM, E4-12
$59.95 $150.00
24mm Bulgarian
PWS CQB 74 muzzle brake is designed specifically for compact arms and use in confined spaces. This version is intended for weapons based on the AK series....
In Stock

$59.95
USA, Blank Only, 1mm
NEW Hungarian Underfolder PKMS Bent Receiver Blanks - 80% Complete Just like our Hungarian Underfolder 7.62 receiver flat, without the fire control...
In Stock

$65.00
26mm LH
These M92 Barrel Extensions are made from 6061 aluminum and will bring your barrel to the legal length once permanently attached.  These are threaded...
In Stock

$69.95
26mm LH
This is our engraved version of the M92/M85 barrel extension.  The engraving may not line up exactly on your rifle due to thread timing.  You can...
In Stock

  • Out of stock
AK-Builder 80% Prebent US Polish Underfolder Receiver Blank
$69.95
USA, With Rails and Center Support, 1mm
NEW Polish Underfolder PKMS Bent Receiver Blanks - 80% Complete Just like our Polish Underfolder 7.62 receiver flat, without the fire control group...
 
No products with the selected options in stock

  • Save 7%
  • Out of stock
PRE CHAMBERED GUNSMITH BARREL BLANK 7.62X39MM X 17.5" LENGTH, N-74
$69.95 $74.95
USA
Ideal for a gunsmith or builder with access to a lathe.  This 7.62 caliber blank has been skimmed down the full length of the barrel to 15/16 diameter...
No products with the selected options in stock

$75.95
Plum, Handguards
U.S. made Upper and Lower Handguards for Stamped Receiver. Includes Stainless Steel Heat Shield inside the lower handguard. Black, Plum, Desert Sand, or...
In Stock
 

$99.95
The ONLY 100% milled AK trigger group made in the USA. Made the right way, from solid steel bar stock. Before, the American shooter had to settle for cast...
In Stock

$109.95
USA, Russian W/Plate, 1mm
Using our receiver flats, rails and center support these receivers are bent, rails trimmed and fully heat treated, then the rails are aligned and welded. We...
In Stock
 

  • Save 26%
Polish Tantal Barrel - 5.56x45 .223 Non Chrome
$129.95 $175.00
Made from 4140 Chrome Moly steel.  The handguard retainer slots and extractor clearance cut has also been done on these barrels.  Gas port is not...
In Stock

  • Save 18%
14.375" AMD65 NON-CHROME LINED 7.62 x 39 Barrel
$139.95 $169.95
USA
AMD65 Barrel made 14.375" for use with permanently attaching a muzzle device to bring the overall length of the barrel to the legal 16".  The...
In Stock

  • Save 18%
Yugo M70 16" NON CHROME LINED 7.62 x 39 Barrel
$139.95 $169.95
USA, Standard 0.908
Yugo M70 AK-47 Barrel, 7.62x39, US Made, Non Chrome Lined. 4150 material. These have the extractor cut, handguard retainer cut and barrel threaded 14-1...
In Stock
 

  • Save 18%
AMD-65 US Made Barrel 12.5" Non Chrome
$139.95 $169.95
USA
These are barrels made in our shop from rifled 4150 blanks.  They are stamped 7.62 U.S.A. unlike any other US made barrel. This is the original...
In Stock

  • Save 18%
  • Out of stock
16" 7.62X39 MILLED RECEIVER US NON-CHROME BARREL, D1-41
$139.95 $169.95
USA
16" US made NON CHROME 7.62x39 Barrel for Milled Receivers. - Stamped 7.62 U.S.A. for 922r Compliance. - Non-Chrome Lined Barrel 4150 Steel / will NOT...
No products with the selected options in stock

  • Save 18%
16" NON CHROME LINED 7.62 x 39 Barrel AK47
$139.95 $169.95
USA, Oversize Trunnion Journal 0.910
Machined in our shop from 4150 rifled blanks!  These are stamped 7.62 U.S.A. for 922r Compliance!  No other US made barrel has any markings....
In Stock
 

  • Save 17%
GALIL 5.56 NATO NITRIDED BARREL 18" 1-9 TWIST, L0-21
$144.95 $174.95
0.872" Oversize
These barrels are made to be trimmed on the shoulder that meets the front of the receiver to set headspace.  Made from 4150 1-9 twist Chrome Moly...
In Stock

  • Save 17%
14.375" 7.62X39 AMD65 US BLACK NITRIDED  BARREL, D8-31
$149.95 $179.95
AMD65 Barrel made from 4150 at 14.375" then black nitrided.  This AMD barrel is made for permanently attaching a muzzle device to bring the overall...
In Stock

  • Save 17%
12.5" 7.62X39 AMD-65 US NITRIDED BARREL, D6-11
$149.95 $179.95
These are barrels made in our shop from rifled 4150 blanks then black nitrided.  They are stamped 7.62 U.S.A. unlike any other US made barrel. This...
In Stock

  • Save 17%
16" YUGO  M70 7.62X39 US NITRIDED BARREL, D9-21
$149.95 $179.95
Oversize
Yugo M70 AK-47 Barrel, 7.62x39, US Made, Nitrided. 4150 material. Will work with AK or AKM receivers. These have the extractor cut, handguard retainer...
In Stock
 

  • Save 17%
16" 7.62X39 AKM US BLACK NITRIDED  BARREL, L2-11
$149.95 $179.95
0.920 Oversize
Made from 4150 Chrome Moly steel and then nitrided inside and out.  Gas Port not drilled. 14-1lh muzzle threads. These are made to fit the...
In Stock
 

  • Save 17%
16" 7.62X39 VZ-58 US NITRIDE BARREL 14-1 LH, L2-51
$149.95 $179.95
0.920 Oversize
Made from 4150 Chrome Moly steel and then nitrided inside and out.  Gas Port not drilled. 14-1lh muzzle threads. These are made to fit the VZ-58....
In Stock

  • Save 17%
GALIL SAR 13" NITRIDE BARREL 5.56 NATO 1-9 TWIST 1/2- 28 RH, L2-61
$149.95 $179.95
0.920 Oversize
These barrels are made to be trimmed on the shoulder that meets the front of the receiver to set headspace.  Made from 4150 1-9 twist Chrome Moly...
In Stock

  • Save 17%
16.28" 7.62X39 AK-104 US BLACK NITRIDE BARREL, N-18
$149.95 $179.95
Standard 0.908, 0.908" Standard, 14x1mm LH, Standard, WITHOUT gas port hole, 0.908 Standard
This item is made in the United States and counts as a 922r compliant part. Made to accept JMAC Customs GBC13 gas block/front sight combo,...
In Stock

  • Save 17%
14.5" 7.62X39 AK-104 US BLACK NITRIDE BARREL, N-19
$149.95 $179.95
Standard 0.908, 0.908" Standard, 14x1mm LH, Standard, WITHOUT gas port hole, 0.908 Standard
This item is made in the United States and counts as a 922r compliant part. Made to accept JMAC Customs GBC13 gas block/front sight combo, or...
In Stock

  • Save 17%
12.6" 7.62X39 AK-104 US BLACK NITRIDE BARREL, N-20
$149.95 $179.95
Standard 0.908, 0.908" Standard, Nitrided, 14-1 Left Hand, 14x1mm LH, Standard, WITHOUT gas port hole, 0.908 Standard
This item is made in the United States and counts as a 922r compliant part. Made to accept JMAC Customs GBC13 gas block/front sight combo, or...
In Stock

  • Save 16%
  • Out of stock
16.1" 5.45X39 POLISH TANTAL US BARREL, D7-11
$153.45 $183.45
USA, Chrome Lined
These barrels for the Polish Tantal will allow you to use any 14-1lh muzzle brake instead of using the Tantal Specific brake.  Other than that they will fit...
 
No products with the selected options in stock

  • Save 16%
Polish Tantal Barrel - 5.45x39 16.625" Non Chrome
$154.95 $184.95
USA, 14x1mm LH
Made from 41v50 Chrome Moly steel.  The handguard retainer slots and extractor clearance cut has also been done on these barrels.  Gas port is NOT...
In Stock

  • Save 16%
  • Out of stock
Polish Tantal Barrel - 5.56x45 .223 chrome
$154.95 $184.95
Made from 4150 Chrome Moly steel.  The handguard retainer slots and extractor clearance cut has also been done on these barrels.  Gas port is NOT drilled on...
No products with the selected options in stock

  • Save 16%
16" NON CHROME LINED 7.62 x 39 Barrel AK47
$154.95 $184.95
USA
These are US made Hammer Forged barrels.  7.62x39mm  1:9.45 twist Machined in our shop from 4150 rifled blanks!  These are stamped 7.62...
In Stock

  • Save 6%
16" AK74 5.45X39 US COLD HAMMER FORGED BLACK NITRIDED BARREL, D7-61
$154.95 $164.95
Standard 0.867
These are US made Hammer Forged barrels. The profile of these barrels are for Bulgarian rifles. Trunnion diameter is .867" Made from 4150 1-8...
In Stock