0 Cart
In Stock
Price

Product filters

In Stock
Price

$  –  $

  • $2
  • $50

Build Parts

Sort Alphabetically: Z to A
32 Per Page
YUGO M70-PAP AMBI SLING MOUNT, E4-31
Quick view
$22.95
Yugo M70-PAP Ambi Sling Mount
Yugo M70-PAP Ambi Sling Mount. Will also work with M92, M85 pistols or other variants with a rivet on pistol grip nut. Will NOT work on an underfolder....
In Stock
+ −
Trigger Guard Screw Plate
Quick view
$4.00
Trigger Guard Screw Plate
These trigger guard screw plates are perfect for test assembly for rivet builds or final assembly for screw builds. No need to take small nuts and grind...
In Stock
+ −
  • Save 33%
SINGLE POINT AK SLING ADAPTER PLATE, E2-34
Quick view
$19.95 $29.95
Single Point AK Sling Adapter Plate
Sling mount attaches under the pistol grip as pictured.  Sling can be attached to either side of the rifle. Made from steel.
In Stock
+ −
RIVET FOR TRIGGER GUARD REAR AK-74 TYPE, C4-31
Quick view
$3.25
Rivet for Trigger Guard Rear AK-74 type
Rivet for Trigger Guard, Rear, AK-74 type. The only reason you would need to use this rivet is for an original AK74 trigger or if you are using an...
In Stock
+ −
Red Star Arms FCG Pin Retaining Plate
Quick view
$4.95
Red Star Arms FCG Pin Retaining Plate
If you haven't used one of these yet you're really missing out! This has to be the easiest and most hassle free way to install your fire control group in an...
In Stock
+ −
PSL Brass Barrel Press Puck
Quick view
$9.95
PSL Brass Barrel Press Puck
The PSL Brass Barrel Press Puck is used to press the PSL barrel out of the front trunnion. DO NOT use the other brass nut we sell for the other barrels we...
In Stock
+ −
NEW US MADE AK HAMMER SPRING, C2-41
Quick view
$9.95
New US made AK Hammer Spring
New US made AK47 AK74 Hammer Spring.
In Stock
+ −
NEW SURPLUS AK STOCK SCREW FOR POLYMER STOCK, C7-52
Quick view
$3.25
New Surplus AK Stock Screw For Polymer Stock
New Surplus AK Stock Screw for Polymer Stock. This screw is for holding the stock in the rear trunnion. 
In Stock
+ −
  • Out of stock
NEW SURPLUS AK STOCK SCREW, C7-51
Quick view
$3.25
New Surplus AK Stock Screw
This is for ONE screw not a set of two.  These are original brand new parts not reproduction copies. This screw is for holding the stock in the rear...
No products with the selected options in stock
  • Save 13%
NEW STAINLESS AK47 FLAT FIRING PIN, C5-62
Quick view
$12.95 $14.95
New Stainless AK47 Flat Firing Pin
Flat AK-47 7.62X39 firing pin made of stainless steel then heat treated. Made in the USA. These are black nitrided. Length is 3.282".
In Stock
+ −
New AK Front Sight Post Round .075 Diameter Tip
Quick view
$8.45
New AK Front Sight Post Round .075 Diameter Tip
New US made original style front sight post with .075" round tip.  These are made of heat treated steel and black oxided.
In Stock
+ −
NEW AK FRONT SIGHT POST ROUND .050 DIAMETER TIP, C11-11
Quick view
$8.45
New AK Front Sight Post Round .050 Diameter Tip
New US made original style front sight post with .050" round tip.  These are made of heat treated steel and black oxided.
In Stock
+ −
NEW AK FRONT SIGHT POST ORIGINAL STYLE, C10-41
Quick view
$5.45
New AK Front Sight Post Original Style
New US made original style front sight post.  These are made of heat treated steel and black oxided.
In Stock
+ −
M92/M85 PAP PISTOL MUZZLE DETENT SET, C6-51
Quick view
$14.95
M92/M85 PAP Pistol Muzzle Detent Set
These detent sets are for the PAP M92/M85 pistols that were shipped without them installed.  Made from 4140 steel and finished with black oxide....
In Stock
+ −
East German AK Magazine Catch
Quick view
$10.95
East German AK Magazine Catch
East German magazine catch.
In Stock
+ −
BLACK AK RECOIL BUFFER, A3-21
Quick view
$10.95
Black AK Recoil Buffer
Slides over spring assembly with no disassembly required! Not the hard plastic buffers like the others.
In Stock
+ −
AK Barrel Pin
Quick view
$6.95
AKM Barrel Pin
Standard AKM barrel pins made from tool steel and heat treated like the originals. The dimensions of these were taken from Romanian barrel pins at .277....
In Stock
+ −
AK47 FRONT SIGHT DETENT NEW, B4-51
Quick view
$5.95
AK47 Front Sight Detent New
These were made like the Romanian and AMD detents and should fit any standard front sight that uses a 14mm threaded muzzle.  THIS WILL NOT FIT AN M92,...
In Stock
+ −
AK47 BULLET GUIDE RIVET, A3-12
Quick view
$3.25
AK47 Bullet Guide Rivet
This rivet is used for installing the bullet guide onto a trunnion.
In Stock
+ −
  • Save 20%
AK-Builder Undrilled AK Trigger Guard
Quick view
$12.00 $15.00
AK-Builder Undrilled AK Trigger Guard
New production trigger guard made from .063" 4130 steel with a black oxide finish. These were made to fit the standard AKM receivers, but can still be used...
In Stock
+ −
AK-BUILDER SIGHT & GAS BLOCK PIN PUNCH SET, B6-51
Quick view
$49.95
Ak-Builder Sight & Gas Block Pin Punch Set
We designed these punches for demilling parts kits in our shop and use them daily. These can be bought as a set or individually.  The set comes with a...
In Stock
+ −
AK-BUILDER SELECTOR STOP, A2-21
Quick view
$8.95
AK-Builder Selector Stop
New production selector stops made from 4130 chromoly steel. The machining has been done on this piece to just drop in on a receiver with the correct...
In Stock
+ −
AK-BUILDER RPK 47 LOWER BOLT GUIDE RAILS, E0-11
Quick view
$9.95
AK-Builder RPK 47 Lower Bolt Guide Rails
These rails are made like the originals that didn't use mag dimples on the receiver.  These are made from 4130 steel and are not heat treated.
In Stock
+ −
AK-BUILDER MAG CATCH SPRING, A2-25
Quick view
$2.50
AK-Builder Mag Catch Spring
New production magazine catch spring.
In Stock
+ −
  • Save 16%
AK-BUILDER MAG CATCH PIVOT PIN, A2-24
Quick view
$2.95 $3.50
AK-Builder Mag Catch Pivot Pin
New production magazine catch pivot pin. 5mm diameter.
In Stock
+ −
AK-BUILDER M92/M85 PAP PISTOL SLING MOUNT KIT, G7-61
Quick view
$34.95
AK-Builder M92/M85 PAP Pistol Sling Mount Kit
AK-Builder M92/M85 PAP Pistol Sling Mount Kit Kit Includes: (1) M92/M85 PAP Sling Mount Bracket (2) 8-32 x 1/8" Alloy Steel Socket Head...
In Stock
+ −
AK-Builder Lower Bolt Guide Yugo Rails
Quick view
$10.95
AK-Builder Lower Bolt Guide Yugo Rails
Get a set of the best US made rails available! These have mag stabilizers on both rails unlike any other rails made in the US.There are no holes drilled in...
In Stock
+ −
AK-Builder Lower Bolt Guide Rails
Quick view
$8.95
AK-Builder Lower Bolt Guide Rails
Get a set of the best US made rails available! These have mag stabilizers on both rails unlike any other rails made in the US.There are no holes drilled in...
In Stock
+ −
AK-BUILDER FRONT SIGHT WINDAGE ADJUSTMENT BASE, B5-71
Quick view
$7.50
AK-Builder Front Sight Windage Adjustment Base
One Groove
New production bases for replacing old parts or for assembling new front sights. These are made from 4140 and heat treated then black oxided. Your...
In Stock
 
Select an option
AK-BUILDER FRONT SIGHT & GAS BLOCK SUPPORT, C8-11
Quick view
$29.95
AK-Builder Front Sight & Gas Block Support
Here is a tool that we have been using to demill and populate our parts kits.  This is made to support the AKM gas block and front sight while...
In Stock
+ −
AK-BUILDER BERYL STOCK RETAINING BRACKET, G7-41
Quick view
$19.95
AK-Builder Beryl Stock Retaining Bracket
AK-Builder Beryl Stock Retaining Bracket We checked several stocks and the slots were different depths, so the tabs on the bracket are left oversized -...
In Stock
+ −
AK-BUILDER AK PISTOL GRIP NUT, C3-73
Quick view
$5.25
AK-Builder AK Pistol Grip Nut
This is a copy of an original Polish grip nut that goes on the inside of the receiver. If you are buying a Hogue or any other grip that uses a short screw...
In Stock
+ −