Drills and Taps

$3.25
This drill is used for drilling holes for the 4.5mm rivet holes in the bent receivers as well as opening the hammer pin hole on my flats before reaming to...
In Stock
+

$3.25
#21 Screw Machine Drill Bit
In Stock
+

$2.95
Replacement drill bit for our milled receiver drilling fixture. Used to drill the selector stop hole and for drilling the trigger hole before...
In Stock
+

$25.00
This is the same reamer we use to work with the .302 barrel pin holes.  Drill the hole first with a 7mm drill then ream the hole.  The reamer has more...
In Stock
+

$25.00
Use this reamer for the .315 oversize barrel pins.  Start with the hole drilled at 7mm then switch to the reamer.
In Stock
+

$9.95
This drill bit is for drilling the large selector hole on the right side of the receiver. This makes the larger side of the keyhole.  Get our 7/32 drill...
In Stock
+

$12.95
12mm x 1.25mm tap for cleaning up the threads on the bolt carrier when installing a new gas piston. Made of high speed steel for long life.
In Stock
+

$4.65
2.5mm Screw Machine Drill Bit
In Stock
+

$2.85
Material: HSS Screw Machine - Drills Size: 0.1181 In 3.00 mm Flute Length: 5/8, 16 mm Overall Length: 1-13/16, 46 mm Finish/Coating: Black...
In Stock
+

$3.29 $2.95
HSS Screw Machine - Drills Size: 0.1575 In., 4.00 mm Flute Length: 7/8, 22 mm Overall Length: 2-5/32, 55 mm Finish/Coating: Black Oxide Point...
In Stock
+

$2.95
These are the same drills I use in the Rivet Drilling tool, drilling gas piston rivet holes and for drilling holes for the 4mm rivet holes in receivers....
In Stock
+

$32.45
 5mm and 7mm reamers for finishing the hammer and trigger holes on my flats. These will ensure that you have perfectly round holes for the axis pins to go...
In Stock
+