0 Cart

7.62 Sidefolder Khyber Pass Flat - Top Rail Bent and Trimmed

B2-31Y
In Stock
$59.95
Add to wish list
7.62 SIDEFOLDER KHYBER PASS FLAT - TOP RAIL BENT AND TRIMMED, B2-31Y

7.62 Sidefolder Khyber Pass Flat - Top Rail Bent and Trimmed

$59.95

This flat is for using a Bulgarian style rear sidefolding stock/trunnion to make the so called "Khyber Pass" AK's in 7.62x39.

  • Receiver flat thickness= 1mm (.040") 
  • Material 4130 Annealed
  • Comes with bolt guide rails
  • Rails and flat need to be heat treated after bending

 


Reccomended rivets and center support (not included with flat)

  • AKS Underfolder Rivet Set
  • 1mm Center Support

 

To use these flats you will need to have a 5mm and 7mm reamer.  The physics of bending sheet metal make it next to impossible to have a bend close to a hole without distorting.  To solve this the holes on the flat are undersized and need to be reamed to size after bending.  Look at the receiver flat instruction page to see more info.

The rails that will come with the flats are pictured below. They have mag stabilizers on both rails to keep the mag from tilting and causing feed problems.  Before installing the rails you will need to trim the mag stabilizers to match the caliber of flat you are using.

 

AK RECEIVER LOER BOLT GUIDE RAILS

 

 

This item is made in the United States and counts as a 922r compliant part.

 

Options:
With Y & I Embossing
Receiver Thickness:
1mm
$37.95
This tool is made for removing the trunnion rivets off of parts kits or removing rivets that we sell.  Made of steel then heat treated for wear...
B6-31
In Stock

$270.00
THIS WILL INSTALL THE FRONT/REAR TRUNNION RIVETS AND CENTER SUPPORTS .  It will not install the trigger guard rivets. Are you ready for a...
T5-11
In Stock

$44.95
 5mm and 7mm reamers for finishing the hammer and trigger holes on my flats. These will ensure that you have perfectly round holes for the axis pins to...
A2-31
In Stock

$14.00
PSL/FPK
The new long rear trunnion rivets have a slightly shorter head and the cupped tool that supports the rivets will need to be sanded down to keep the...
A0-11
In Stock
 

$7.00
Based on the Bulgarian style center support these DO NOT HAVE THE FLAT on them. Other countries have a larger diameter center support with the...
A1-31
In Stock

$14.95
These new plates have been made from the dimensions of original demilled Russian and Bulgarian plates. This plate welds to the rear lower section of...
B6-41
In Stock

No reviews found