0 Cart

M92 Underfolder Trunnion Flat

B1-31Y
M92 UNDERFOLDER TRUNNION FLAT, B1-31Y

M92 Underfolder Trunnion Flat

$59.95

This flat will work with the M92 or M70 that has the flat sided front trunnion. These will NOT WORK with the bulged RPK style trunnions.  There aren't many that have the flat sided front trunnion, but there are a few out there.

 

  • Receiver flat thickness= 1mm (.040")
  • Material 4130 Annealed
  • Comes with bolt guide rails
  • Rails and flat need to be heat treated after bending


Reccomended rivets and center support (not included with flat)

  • Yugo M92 Rivet Set
  • 1mm Center Support

To use these flats you will need to have a 5mm and 7mm reamer.  The physics of bending sheet metal make it next to impossible to have a bend close to a hole without distorting.  To solve this the holes on the flat are undersized and need to be reamed to size after bending.  Look at the receiver flat instruction page to see more info.

The rails that will come with the flats are pictured below. They have mag stabilizers on both rails to keep the mag from tilting and causing feed problems.  Before installing the rails you will need to trim the mag stabilizers to match the caliber of flat you are using.

 

AK RECEIVER LOER BOLT GUIDE RAILS

 

 

 

This item is made in the United States and counts as a 922r compliant part.

Premium Flat Options:
With Y & I Embossing
Receiver Thickness:
1mm
$37.95
This tool is made for removing the trunnion rivets off of parts kits or removing rivets that we sell.  Made of steel then heat treated for wear...
B6-31
In Stock

$270.00
THIS WILL INSTALL THE FRONT/REAR TRUNNION RIVETS AND CENTER SUPPORTS .  It will not install the trigger guard rivets. Are you ready for a...
T5-11
In Stock

$4.95
If you haven't used one of these yet you're really missing out! This has to be the easiest and most hassle free way to install your fire control group in an...
A1-21
In Stock

$44.95
 5mm and 7mm reamers for finishing the hammer and trigger holes on my flats. These will ensure that you have perfectly round holes for the axis pins to...
A2-31
In Stock

$14.00
PSL/FPK
The new long rear trunnion rivets have a slightly shorter head and the cupped tool that supports the rivets will need to be sanded down to keep the...
A0-11
In Stock
 

$7.00
Based on the Bulgarian style center support these DO NOT HAVE THE FLAT on them. Other countries have a larger diameter center support with the...
A1-31
In Stock

No reviews found