0 Cart
C5-12

One Inch Capacity C-Clamp

$3.75
Write a review
+ −
Add to wish list Compare
Small blue one-inch capacity C-clamp with metallic screw.

One Inch Capacity C-Clamp

$3.75

Small C-Clamp for installing the lower rails in your receiver or for clamping the scribe jig to the bent receiver to mark the cutouts of the top rail.

Angled view of AK-Builder steel Rail Alignment Fixture showing front clamp and screw.
$29.95
AK-Builder Rail Alignment Fixture

AK-Builder rail alignment fixture — positions and clamps lower bolt guide rails in stamped receivers for accurate welding and alignment.

C3-61
In Stock
+ −
Angled view of two uncoated high-speed steel 5mm and 7mm reamers for AK receiver pins.
$44.95
5mm & 7mm Reamer Set

5 mm and 7 mm reamer set for finishing AK hammer and trigger pin holes. Use slow speed with cutting oil.

A2-31
In Stock
+ −
AK-Builder AK Trunnion Rivet Hole Drilling Fixture with red 7.62mm and blue 5.45mm mandrels.
$99.95
AK Trunnion Rivet Hole Drilling Fixture
Here is a professional tool for drilling the front and rear trunnion holes in AK47 receivers.  This tool will work with 7.62 and 5.45 trunnions...
T3-11
In Stock
 
Select an option
Two inch capacity C-clamp, dark blue painted body, metallic clamping screw.
$4.95
Two Inch Capacity C-Clamp
Two inch C-Clamp for clamping trunnions for test fitting parts to your rifle before final installation.
C5-13
In Stock
+ −
AK-Builder Bulgarian-style center support sleeve and rivet for 1mm receivers, heat treated alloy steel.
$7.00
AK Center Support for 1mm Receivers
AK-Builder Center Support & Rivet — Bulgarian-Style (No Flat) Modern, builder-proven center support set patterned after Bulgarian receivers....
A1-31
In Stock
+ −
Close-up of AK-Builder Spot Welder Tong with screw-on tip welding an AK receiver rail.
$39.95
Spot Welder Tong
This spot welder tong is designed to work with the Harbor Freight #45689 welder or 61205-61206 if you get the extended tip . Avoid the 220v...
A1-41
In Stock
+ −

No reviews found

Customers Also Bought

Angled view of AK-Builder steel Rail Alignment Fixture showing front clamp and screw.
AK-Builder Rail Alignment Fixture
$29.95
Angled view of two uncoated high-speed steel 5mm and 7mm reamers for AK receiver pins.
5mm & 7mm Reamer Set
$44.95
AK-Builder AK Trunnion Rivet Hole Drilling Fixture with red 7.62mm and blue 5.45mm mandrels.
AK Trunnion Rivet Hole Drilling Fixture
$99.95
Select an option
Two inch capacity C-clamp, dark blue painted body, metallic clamping screw.
Two Inch Capacity C-Clamp
$4.95
AK-Builder Bulgarian-style center support sleeve and rivet for 1mm receivers, heat treated alloy steel.
AK Center Support for 1mm Receivers
$7.00
Close-up of AK-Builder Spot Welder Tong with screw-on tip welding an AK receiver rail.
Spot Welder Tong
$39.95
AK-Builder AK Rivet Set, black oxide coated, showing various lengths and head styles.
AK-Builder AK Rivet Set
$9.00
Select an option
AK-Builder Trigger Guard Riveting Jig, black oxide finish, with detached components.
AK47 Trigger Guard Riveting Jig
$85.00
RIVET HEAD DRILLING TOOL, B6-31
Rivet Head Drilling Tool
$37.95
Red Star Arms FCG pin retaining plate, dark heat-treated steel, side view.
Red Star Arms FCG Pin Retaining Plate
$4.95
5/32" .1563" SCREW MACHINE DRILL BIT, C1-72
5/32" .1563" Screw Machine Drill Bit
$2.95
AK-Builder Barrel Press Kit components: black oxided rams, brass block, and trunnion blocks.
AK-Builder Barrel Press Kit
$139.95
Select an option