0 Cart
A1-13
In Stock

Speedway Upper Tong Extension

$25.00
Write a review
+ −
Add to wish list Compare
SPEEDWAY UPPER TONG EXTENSION, A1-13

Speedway Upper Tong Extension

$25.00

Use this copper extension with the spot welders commonly found on Ebay.  Most use the Speedway name and have a different tong setup than the Harbor Freight welders. To use this you just unscrew the original upper tong tip and replace with the extended tip.

YOU DO NOT NEED THIS IF YOU BUY THE SPOT WELDER FROM HARBOR FREIGHT!

Close-up of AK-Builder Spot Welder Tong with screw-on tip welding an AK receiver rail.
$39.95
Spot Welder Tong
This spot welder tong is designed to work with the Harbor Freight #45689 welder or 61205-61206 if you get the extended tip . Avoid the 220v...
A1-41
In Stock
+ −
Angled view of AK-Builder steel Rail Alignment Fixture showing front clamp and screw.
$29.95
AK-Builder Rail Alignment Fixture

AK-Builder rail alignment fixture — positions and clamps lower bolt guide rails in stamped receivers for accurate welding and alignment.

C3-61
In Stock
+ −
AK-Builder Bulgarian-style center support sleeve and rivet for 1mm receivers, heat treated alloy steel.
$7.00
AK Center Support for 1mm Receivers
AK-Builder Center Support & Rivet — Bulgarian-Style (No Flat) Modern, builder-proven center support set patterned after Bulgarian receivers....
A1-31
In Stock
+ −
LOWER TONG REPLACEMENT TIPS, A1-11
$17.50
Lower tong replacement tips
Replacement tip for lower tong.
A1-11
In Stock
+ −
AK-Builder AK Rivet Set, black oxide coated, showing various lengths and head styles.
$9.00
AK-Builder AK Rivet Set
AKM Fixed Stock
The new long rear trunnion rivets have a slightly shorter head and the cupped tool that supports the rivets will need to be sanded down to keep the...
A0-61
In Stock
 
Select an option
Angled view of two uncoated high-speed steel 5mm and 7mm reamers for AK receiver pins.
$44.95
5mm & 7mm Reamer Set

5 mm and 7 mm reamer set for finishing AK hammer and trigger pin holes. Use slow speed with cutting oil.

A2-31
In Stock
+ −

No reviews found

Customers Also Bought

Close-up of AK-Builder Spot Welder Tong with screw-on tip welding an AK receiver rail.
Spot Welder Tong
$39.95
Angled view of AK-Builder steel Rail Alignment Fixture showing front clamp and screw.
AK-Builder Rail Alignment Fixture
$29.95
AK-Builder Bulgarian-style center support sleeve and rivet for 1mm receivers, heat treated alloy steel.
AK Center Support for 1mm Receivers
$7.00
LOWER TONG REPLACEMENT TIPS, A1-11
Lower tong replacement tips
$17.50
AK-Builder AK Rivet Set, black oxide coated, showing various lengths and head styles.
AK-Builder AK Rivet Set
$9.00
Select an option
Angled view of two uncoated high-speed steel 5mm and 7mm reamers for AK receiver pins.
5mm & 7mm Reamer Set
$44.95
AK-Builder AK Trunnion Rivet Hole Drilling Fixture with red 7.62mm and blue 5.45mm mandrels.
AK Trunnion Rivet Hole Drilling Fixture
$99.95
Select an option
Side view of 1.5mm heat treated 4130 steel center support and rivet, in the white.
1.5mm Center Support and Rivet
$7.00
AK-Builder AK47 7.62 receiver flat, 4130 annealed, in the white, with pre-punched trunnion holes.
AK47 7.62 Flat With Trunnion Holes
$46.95
Select an option
5/32" .1563" SCREW MACHINE DRILL BIT, C1-72
5/32" .1563" Screw Machine Drill Bit
$2.95
AK-Builder AK74 5.45x39 receiver flat, 4130 annealed, in the white, with 5.45 magwell dimples.
AK74 5.45x39 Fixed Stock Receiver Flat
$45.95
Select an option
AK-Builder riveting press, black-finished, showing main unit, assorted dies and supports.
AK-Builder Rivet Tool
$270.00