0 Cart
  • Save 26%
M-24
In Stock

Polish Tantal Barrel - 5.56x45 .223 Non Chrome

$129.95
$175.00
Write a review
+ −
Add to wish list Compare
Angled view of Polish Tantal 5.56x45 .223 barrel in the white, gas port undrilled.

Polish Tantal Barrel - 5.56x45 .223 Non Chrome

$129.95
$175.00

Made from 4140 Chrome Moly steel.  The handguard retainer slots and extractor clearance cut has also been done on these barrels.  Gas port is not drilled on these barrels.

These barrels are made from rifle blanks with a .219" bore and 1-9 twist.  Each barrel is stamped USA for 922r compliance.

 

 

Side view of 1.5mm heat treated 4130 steel center support and rivet, in the white.
$7.00
1.5mm Center Support and Rivet
These are made from heat treated 4130 steel and the rivets are a copy of an original AK center support rivet. The length is shorter than the 1mm center...
C8-51
In Stock
+ −
Polish Tantal 5.45x39 4130 annealed receiver flat with unique selector holes and bolt guide rails.
$59.95
Polish Tantal Flat 5.45 x 39
With Y & I Embossing, 1mm
This flat is specifially made for the Polish Tantal to work with the left side selector and right side safety.  The hole for the selector/safety is a...
B1-11Y
In Stock
 
Select an option
AK-Builder AK Rivet Set, black oxide coated, showing various lengths and head styles.
$14.00
AK-Builder AK Rivet Set
PSL/FPK
The new long rear trunnion rivets have a slightly shorter head and the cupped tool that supports the rivets will need to be sanded down to keep the...
A0-11
In Stock
 
Select an option
  • Save 12%
Horizontal view of new production AK47 disconnector spring, dark finished steel.
$3.49 $3.95
AK Disconnector Spring
New production AK47 disconnector spring.
A2-11
In Stock
+ −
AK-Builder AK74 5.45x39 receiver flat, 4130 annealed, in the white, with 5.45 magwell dimples.
$45.95
AK74 5.45x39 Fixed Stock Receiver Flat
With Y & I Embossing, 1mm
This flat has the magwell and mag dimples to match the 5.45 magazines which are narrower then 7.62 mags.  There are no front or rear trunnion holes....
B2-41Y
In Stock
 
Select an option
AK-Builder Bulgarian-style center support sleeve and rivet for 1mm receivers, heat treated alloy steel.
$7.00
AK Center Support for 1mm Receivers
AK-Builder Center Support & Rivet — Bulgarian-Style (No Flat) Modern, builder-proven center support set patterned after Bulgarian receivers....
A1-31
In Stock
+ −

No reviews found

Customers Also Bought

Side view of 1.5mm heat treated 4130 steel center support and rivet, in the white.
1.5mm Center Support and Rivet
$7.00
Polish Tantal 5.45x39 4130 annealed receiver flat with unique selector holes and bolt guide rails.
Polish Tantal Flat 5.45 x 39
$59.95
Select an option
AK-Builder AK Rivet Set, black oxide coated, showing various lengths and head styles.
AK-Builder AK Rivet Set
$14.00
Select an option
Save 12% Horizontal view of new production AK47 disconnector spring, dark finished steel.
AK Disconnector Spring
$3.95 $3.49
AK-Builder AK74 5.45x39 receiver flat, 4130 annealed, in the white, with 5.45 magwell dimples.
AK74 5.45x39 Fixed Stock Receiver Flat
$45.95
Select an option
AK-Builder Bulgarian-style center support sleeve and rivet for 1mm receivers, heat treated alloy steel.
AK Center Support for 1mm Receivers
$7.00
AK-Builder black oxided heat treated tool steel extended length axis pin with head.
AK Hammer/Trigger Extended Length Axis Pin
$3.49
.300 BARREL PIN REAMER, A2-32
.300 Barrel Pin Reamer
$36.95
AK-Builder Flat Bending Die Set: machined steel punch, alignment pins, receiver flat, and base.
AK-Builder Flat Bending Die Set
$219.95
Select an option
NEW US MADE AK HAMMER SPRING, C2-41
New US made AK Hammer Spring
$9.95
NEW AK-74 Oversized Barrel Pin
AK-74 Oversized Barrel Pin .302
$5.95
Save 48% 21.5" M72 RPK 7.62X39 US BLACK NITRIDED BARREL, D1-51
21.5" M72 RPK 7.62x39 US Black Nitrided B...
$229.95 $119.95
Select an option