0 Cart
  • Out of stock
F6-31

AK-Builder AK47-AK74 Stamped 5 Position Commercial Buffer Tube Stock Conversion 6061 T6 Aluminum w/QD Mounts

$64.95
Write a review
Add to wish list Compare
AK-BUILDER AK47-AK74 STAMPED 5 POSITION COMMERCIAL BUFFER TUBE STOCK CONVERSION 6061 T6 ALUMINUM W/QD MOUNTS, F6-31

AK-Builder AK47-AK74 Stamped 5 Position Commercial Buffer Tube Stock Conversion 6061 T6 Aluminum w/QD Mounts

$64.95

We made these since the cheap Chinese made tubes aren't that great and the better tubes seem to always be $100.  These were made to be affordable so anybody can put one on their fixed stock rifle and it not break.  The metal insert may need to be adjusted or sanded to fit since the tolerances of sheet metal receivers can be all over the place.

The tubes are made for European style fixed stock trunnions.  Chinese trunnions have different hole spacing and we don't have tubes for those at the moment.

* Made in USA

* Media blasted and mil spec hard anodized

* The 5 positions

* Commercial Size tube

* 6061 Extrusions not cast like Chinese models

* One piece body with metal insert to fill receiver gap

* Rubber cap installed in the end of the tube

 

Furniture:
  • Collapsible Stocks
  • Stock Adapter
  • Save 12%
Horizontal view of new production AK47 disconnector spring, dark finished steel.
$3.49 $3.95
AK Disconnector Spring
New production AK47 disconnector spring.
A2-11
In Stock
+ −
Red Star Arms FCG pin retaining plate, dark heat-treated steel, side view.
$4.95
Red Star Arms FCG Pin Retaining Plate

Original Red Star Arms retaining plate — heat-treated steel, installs in seconds, replaces wire retainer, fits most AKs.

A1-21
In Stock
+ −
Angled view of two uncoated high-speed steel 5mm and 7mm reamers for AK receiver pins.
$44.95
5mm & 7mm Reamer Set

5 mm and 7 mm reamer set for finishing AK hammer and trigger pin holes. Use slow speed with cutting oil.

A2-31
In Stock
+ −
Close-up of AK-Builder Spot Welder Tong with screw-on tip welding an AK receiver rail.
$39.95
Spot Welder Tong
This spot welder tong is designed to work with the Harbor Freight #45689 welder or 61205-61206 if you get the extended tip . Avoid the 220v...
A1-41
In Stock
+ −
AK47 BULLET GUIDE RIVET, A3-12
$3.25
AK47 Bullet Guide Rivet
This rivet is used for installing the bullet guide onto a trunnion.
A3-12
In Stock
+ −
Angled view of AK-Builder steel Rail Alignment Fixture showing front clamp and screw.
$29.95
AK-Builder Rail Alignment Fixture

AK-Builder rail alignment fixture — positions and clamps lower bolt guide rails in stamped receivers for accurate welding and alignment.

C3-61
In Stock
+ −

No reviews found

Customers Also Bought

Save 12% Horizontal view of new production AK47 disconnector spring, dark finished steel.
AK Disconnector Spring
$3.95 $3.49
Red Star Arms FCG pin retaining plate, dark heat-treated steel, side view.
Red Star Arms FCG Pin Retaining Plate
$4.95
Angled view of two uncoated high-speed steel 5mm and 7mm reamers for AK receiver pins.
5mm & 7mm Reamer Set
$44.95
Close-up of AK-Builder Spot Welder Tong with screw-on tip welding an AK receiver rail.
Spot Welder Tong
$39.95
AK47 BULLET GUIDE RIVET, A3-12
AK47 Bullet Guide Rivet
$3.25
Angled view of AK-Builder steel Rail Alignment Fixture showing front clamp and screw.
AK-Builder Rail Alignment Fixture
$29.95
Save 17% 16" 7.62X39 AKM US BLACK NITRIDED BARREL, C8-71
16" 7.62x39 AKM US Black Nitrided Barrel
$179.95 $149.95
Select an option
NEW US MADE AK HAMMER SPRING, C2-41
New US made AK Hammer Spring
$9.95
AK-BUILDER FRONT SIGHT & GAS BLOCK SUPPORT, C8-11
AK-Builder Front Sight & Gas Block Support
$29.95
AK-Builder AK Rivet Set, black oxide coated, showing various lengths and head styles.
AK-Builder AK Rivet Set
$14.00
Select an option
AK-Builder Bulgarian-style center support sleeve and rivet for 1mm receivers, heat treated alloy steel.
AK Center Support for 1mm Receivers
$7.00
5/32" .1563" SCREW MACHINE DRILL BIT, C1-72
5/32" .1563" Screw Machine Drill Bit
$2.95