0 Cart
  • Save 19%
C3-21

Front Sight-Gas Block Drill Bit for Virgin Parts Kits #32

$3.65
$4.50
Write a review
+ −
Add to wish list Compare
FRONT SIGHT-GAS BLOCK DRILL BIT FOR VIRGIN PARTS KITS #32, C3-21

Front Sight-Gas Block Drill Bit for Virgin Parts Kits #32

$3.65
$4.50

We use these drill bits when populating virgin parts kits without a pre-drilled hole in the gas block and front sight block that have never been drilled before.  Use this drill instead of the 3mm drill since it will have a tendency to oversize the hole compared to the #32 drill.

Made in USA
Drill Bit Size (Wire)    #32
Tool Material    High Speed Steel
Cutting Direction    Right Hand
Coating/Finish    Oxide
Drill Point Angle    135
Spiral Type    Regular
Flute Type    Spiral
Point Type    Split

5/32" .1563" SCREW MACHINE DRILL BIT, C1-72
$2.95
5/32" .1563" Screw Machine Drill Bit
These are the same drills I use in the Rivet Drilling tool, drilling gas piston rivet holes and for drilling holes for the 4mm rivet holes in receivers....
C1-72
+ −
GAS PORT DRILL BIT, C7-21
$8.95
Gas Port Drill Bit
These are the drill bits I use for drilling 7.62 gas ports.  These will fit into the port and it will guide the drill.  Just press the gas block...
C7-21
In Stock
+ −
AK-Builder AK Rivet Set, black oxide coated, showing various lengths and head styles.
$9.00
AK-Builder AK Rivet Set
AKM Fixed Stock
The new long rear trunnion rivets have a slightly shorter head and the cupped tool that supports the rivets will need to be sanded down to keep the...
A0-61
In Stock
 
Select an option
BARREL PIN DRILL BIT FOR VIRGIN PARTS KITS .272", C7-63
$5.95
Barrel Pin Drill Bit for Virgin Parts Kits .272"
We use these drill bits when populating virgin parts kits without a pre-drilled hole in the trunnion for the barrel pin. Tool Material  ...
C7-63
+ −
Angled view of two uncoated high-speed steel 5mm and 7mm reamers for AK receiver pins.
$44.95
5mm & 7mm Reamer Set

5 mm and 7 mm reamer set for finishing AK hammer and trigger pin holes. Use slow speed with cutting oil.

A2-31
In Stock
+ −
AK-BUILDER FRONT SIGHT & GAS BLOCK SUPPORT, C8-11
$29.95
AK-Builder Front Sight & Gas Block Support
Here is a tool that we have been using to demill and populate our parts kits.  This is made to support the AKM gas block and front sight while...
C8-11
In Stock
+ −

No reviews found

Customers Also Bought

5/32" .1563" SCREW MACHINE DRILL BIT, C1-72
5/32" .1563" Screw Machine Drill Bit
$2.95
GAS PORT DRILL BIT, C7-21
Gas Port Drill Bit
$8.95
AK-Builder AK Rivet Set, black oxide coated, showing various lengths and head styles.
AK-Builder AK Rivet Set
$9.00
Select an option
BARREL PIN DRILL BIT FOR VIRGIN PARTS KITS .272", C7-63
Barrel Pin Drill Bit for Virgin Parts Kit...
$5.95
Angled view of two uncoated high-speed steel 5mm and 7mm reamers for AK receiver pins.
5mm & 7mm Reamer Set
$44.95
AK-BUILDER FRONT SIGHT & GAS BLOCK SUPPORT, C8-11
AK-Builder Front Sight & Gas Block Support
$29.95
RIVET HEAD DRILLING TOOL, B6-31
Rivet Head Drilling Tool
$37.95
Save 12% 3mm Retainer Pin, Front Sight & Gas Block to Barrel
3mm Retainer Pin Front Sight & Gas Block ...
$3.29 $2.89
.300 BARREL PIN REAMER, A2-32
.300 Barrel Pin Reamer
$36.95
AK Barrel Pin
AKM Barrel Pin
$6.95
3MM SCREW MACHINE DRILL BIT, C7-22
3mm Screw Machine Drill Bit
$3.65
Close-up of drilled .076" gas port on Bulgarian AK74 gas block.
Cobalt Gas Port Drill for Bulgarian AK74's
$4.95