0 Cart
C7-11
In Stock

Gas Piston Drilling Jig

$37.95
Write a review
+ −
Add to wish list
Angled view of dark heat-treated steel gas piston drilling jig, TiN drill bit.

Gas Piston Drilling Jig

$37.95

Gas Piston Drilling Jig

Tool for accurately drilling the gas piston rivet hole in the center of the piston. Made from heat-treated steel for durability and includes the correct drill bit for the job.

Features

  • Heat-treated steel construction for long life

  • Includes properly sized drill bit

  • Locks piston securely for accurate drilling

  • Compact and easy to use on any standard AK gas piston assembly

How to Use

  1. Screw the gas piston into your carrier and mark where the rivet hole will go.

  2. Insert the piston into the jig with the mark positioned at the top or bottom of the drill opening.

  3. Tighten the locking screw to hold the piston in place.

  4. Drill the rivet hole through the guide opening, then remove and rivet as normal.

AK-Builder AK Trunnion Rivet Hole Drilling Fixture with red 7.62mm and blue 5.45mm mandrels.
Quick view
$99.95
AK Trunnion Rivet Hole Drilling Fixture
Here is a professional tool for drilling the front and rear trunnion holes in AK47 receivers.  This tool will work with 7.62 and 5.45 trunnions...
T3-11
In Stock
 
Select an option
RIVET HEAD DRILLING TOOL, B6-31
Quick view
$37.95
Rivet Head Drilling Tool

Rivet head drilling tool — heat-treated steel, includes 5/32" drill bit. Designed for removing trunnion rivets from AK parts kits.

B6-31
In Stock
+ −
Angled view of AK-Builder steel Rail Alignment Fixture showing front clamp and screw.
Quick view
$29.95
AK-Builder Rail Alignment Fixture

AK-Builder rail alignment fixture — positions and clamps lower bolt guide rails in stamped receivers for accurate welding and alignment.

C3-61
In Stock
+ −
AK GAS PISTON RIVET, A4-51
Quick view
$1.25
AK Gas Piston Rivet
AK Gas Piston Rivet Correct rivet for securing AK gas pistons to the bolt carrier. Install notes (summary) Screw the piston into the carrier...
A4-51
In Stock
+ −
Angled view of two uncoated high-speed steel 5mm and 7mm reamers for AK receiver pins.
Quick view
$44.95
5mm & 7mm Reamer Set

5 mm and 7 mm reamer set for finishing AK hammer and trigger pin holes. Use slow speed with cutting oil.

A2-31
In Stock
+ −
AK-BUILDER FRONT SIGHT & GAS BLOCK SUPPORT, C8-11
Quick view
$29.95
AK-Builder Front Sight & Gas Block Support
Here is a tool that we have been using to demill and populate our parts kits.  This is made to support the AKM gas block and front sight while...
C8-11
In Stock
+ −

No reviews found

Customers Also Bought

AK-Builder AK Trunnion Rivet Hole Drilling Fixture with red 7.62mm and blue 5.45mm mandrels.
AK Trunnion Rivet Hole Drilling Fixture
$99.95
Select an option
RIVET HEAD DRILLING TOOL, B6-31
Rivet Head Drilling Tool
$37.95
Angled view of AK-Builder steel Rail Alignment Fixture showing front clamp and screw.
AK-Builder Rail Alignment Fixture
$29.95
AK GAS PISTON RIVET, A4-51
AK Gas Piston Rivet
$1.25
Angled view of two uncoated high-speed steel 5mm and 7mm reamers for AK receiver pins.
5mm & 7mm Reamer Set
$44.95
AK-BUILDER FRONT SIGHT & GAS BLOCK SUPPORT, C8-11
AK-Builder Front Sight & Gas Block Support
$29.95
Angled view of AK-Builder 12mm x 1.25mm gas piston tap, uncoated HSS.
12mm x 1.25mm Gas Piston Tap
$15.95
AK-Builder Trigger Guard Riveting Jig, black oxide finish, with detached components.
AK47 Trigger Guard Riveting Jig
$85.00
AK-Builder Barrel Press Kit components: black oxided rams, brass block, and trunnion blocks.
AK-Builder Barrel Press Kit
$139.95
Select an option
AK-Builder riveting press, black-finished, showing main unit, assorted dies and supports.
AK-Builder Rivet Tool
$270.00
.300 BARREL PIN REAMER, A2-32
.300 Barrel Pin Reamer
$36.95
AK-Builder AK Rivet Set, black oxide coated, showing various lengths and head styles.
AK-Builder AK Rivet Set
$14.00
Select an option