0 Cart
  • Out of stock
B6-41

Triangle Sidefolder Reinforcement Plate

$14.95
Write a review
Add to wish list Compare
New Sidefolder Reinforcement Plate

Triangle Sidefolder Reinforcement Plate

$14.95

These new plates have been made from the dimensions of original demilled Russian and Bulgarian plates.

This plate welds to the rear lower section of the receiver to strengthen that area when using folding stocks.  The bend is in the right spot and not touching the hole so there are not fitting issues. 2.25' long.

This plate was used on the Russian and Bulgarian sidefolding stock rifles since the rear trunnion doesn't support the bottom of the receiver.

AK-Builder Bulgarian-style center support sleeve and rivet for 1mm receivers, heat treated alloy steel.
$7.00
AK Center Support for 1mm Receivers
AK-Builder Center Support & Rivet — Bulgarian-Style (No Flat) Modern, builder-proven center support set patterned after Bulgarian receivers....
A1-31
In Stock
+ −
AK-Builder AK Rivet Set, black oxide coated, showing various lengths and head styles.
$9.00
AK-Builder AK Rivet Set
AKM Fixed Stock
The new long rear trunnion rivets have a slightly shorter head and the cupped tool that supports the rivets will need to be sanded down to keep the...
A0-61
In Stock
 
Select an option
AK-Builder Bulgarian Sidefolder AK74SU 5.45 flat, unfinished 4130 steel with guide rails.
$49.95
Bulgarian Sidefolder AK74SU 5.45 Flat
With Y & I Embossing, 1mm
This flat was made for the Bulgarian style sidefolding triangle or polymer stock.  The magwell and magwell dimples are made to fit 5.45...
B1-21Y
In Stock
 
Select an option
Red Star Arms FCG pin retaining plate, dark heat-treated steel, side view.
$4.95
Red Star Arms FCG Pin Retaining Plate

Original Red Star Arms retaining plate — heat-treated steel, installs in seconds, replaces wire retainer, fits most AKs.

A1-21
In Stock
+ −
Y & I Optional Embossing
$44.95
Standard AK47 Fixed Stock 7.62 Flat
With Y & I Embossing, 1mm
Now with Y & I embossing! These flats can be used for about any 1mm thick 7.62 receiver.  Without the trunnion holes you can put any rear...
B1-71Y
In Stock
 
Select an option
AK-Builder AK74 5.45x39 receiver flat, 4130 annealed, in the white, with 5.45 magwell dimples.
$45.95
AK74 5.45x39 Fixed Stock Receiver Flat
With Y & I Embossing, 1mm
This flat has the magwell and mag dimples to match the 5.45 magazines which are narrower then 7.62 mags.  There are no front or rear trunnion holes....
B2-41Y
In Stock
 
Select an option

No reviews found

Customers Also Bought

AK-Builder Bulgarian-style center support sleeve and rivet for 1mm receivers, heat treated alloy steel.
AK Center Support for 1mm Receivers
$7.00
AK-Builder AK Rivet Set, black oxide coated, showing various lengths and head styles.
AK-Builder AK Rivet Set
$9.00
Select an option
AK-Builder Bulgarian Sidefolder AK74SU 5.45 flat, unfinished 4130 steel with guide rails.
Bulgarian Sidefolder AK74SU 5.45 Flat
$49.95
Select an option
Red Star Arms FCG pin retaining plate, dark heat-treated steel, side view.
Red Star Arms FCG Pin Retaining Plate
$4.95
Y & I Optional Embossing
Standard AK47 Fixed Stock 7.62 Flat
$44.95
Select an option
AK-Builder AK74 5.45x39 receiver flat, 4130 annealed, in the white, with 5.45 magwell dimples.
AK74 5.45x39 Fixed Stock Receiver Flat
$45.95
Select an option
7.62 SIDEFOLDER KHYBER PASS FLAT - TOP RAIL BENT AND TRIMMED, B2-31Y
7.62 Sidefolder Khyber Pass Flat - Top Ra...
$59.95
Select an option
UNDERFOLDER REINFORCEMENT PLATE, A2-41
Underfolder Reinforcement Plate
$14.95
AK-Builder AK47 7.62 receiver flat, 4130 annealed, in the white, with pre-punched trunnion holes.
AK47 7.62 Flat With Trunnion Holes
$46.95
Select an option
Angled view of two uncoated high-speed steel 5mm and 7mm reamers for AK receiver pins.
5mm & 7mm Reamer Set
$44.95
Angled view of AK-Builder steel Rail Alignment Fixture showing front clamp and screw.
AK-Builder Rail Alignment Fixture
$29.95
Side view of 1.5mm heat treated 4130 steel center support and rivet, in the white.
1.5mm Center Support and Rivet
$7.00