0 Cart
A2-31
In Stock

5mm & 7mm Reamer Set

$44.95
Write a review

5 mm and 7 mm reamer set for finishing AK hammer and trigger pin holes. Use slow speed with cutting oil.

+ −
Add to wish list Compare
Angled view of two uncoated high-speed steel 5mm and 7mm reamers for AK receiver pins.

5mm & 7mm Reamer Set

$44.95

5mm & 7mm Reamer Set

5mm and 7mm reamers used to finish the hammer and trigger pin holes on AK-Builder receiver flats. They clean up the drilled holes to the correct size so the axis pins fit smoothly.

Run them at slow speed with cutting oil for the best finish and tool life.

Specs

  • Sizes: 5mm and  mm

  • Material: High-speed steel

  • For finishing hammer / trigger pin holes on AK receiver flats

  • Recommended use: slow RPM with cutting oil

AK-Builder AK Trunnion Rivet Hole Drilling Fixture with red 7.62mm and blue 5.45mm mandrels.
$99.95
AK Trunnion Rivet Hole Drilling Fixture
Here is a professional tool for drilling the front and rear trunnion holes in AK47 receivers.  This tool will work with 7.62 and 5.45 trunnions...
T3-11
In Stock
 
Select an option
AK-Builder Bulgarian-style center support sleeve and rivet for 1mm receivers, heat treated alloy steel.
$7.00
AK Center Support for 1mm Receivers
AK-Builder Center Support & Rivet — Bulgarian-Style (No Flat) Modern, builder-proven center support set patterned after Bulgarian receivers....
A1-31
In Stock
+ −
.300 BARREL PIN REAMER, A2-32
$36.95
.300 Barrel Pin Reamer
This is the same reamer we use to work with the .302 barrel pin holes.  Drill the hole first with a 7mm drill then ream the hole.  The reamer has...
A2-32
+ −
AK-Builder AK Rivet Set, black oxide coated, showing various lengths and head styles.
$9.00
AK-Builder AK Rivet Set
AKM Fixed Stock
The new long rear trunnion rivets have a slightly shorter head and the cupped tool that supports the rivets will need to be sanded down to keep the...
A0-61
In Stock
 
Select an option
RIVET HEAD DRILLING TOOL, B6-31
$37.95
Rivet Head Drilling Tool

Rivet head drilling tool — heat-treated steel, includes 5/32" drill bit. Designed for removing trunnion rivets from AK parts kits.

B6-31
In Stock
+ −
Angled view of AK-Builder steel Rail Alignment Fixture showing front clamp and screw.
$29.95
AK-Builder Rail Alignment Fixture

AK-Builder rail alignment fixture — positions and clamps lower bolt guide rails in stamped receivers for accurate welding and alignment.

C3-61
In Stock
+ −

No reviews found

Customers Also Bought

AK-Builder AK Trunnion Rivet Hole Drilling Fixture with red 7.62mm and blue 5.45mm mandrels.
AK Trunnion Rivet Hole Drilling Fixture
$99.95
Select an option
AK-Builder Bulgarian-style center support sleeve and rivet for 1mm receivers, heat treated alloy steel.
AK Center Support for 1mm Receivers
$7.00
.300 BARREL PIN REAMER, A2-32
.300 Barrel Pin Reamer
$36.95
AK-Builder AK Rivet Set, black oxide coated, showing various lengths and head styles.
AK-Builder AK Rivet Set
$9.00
Select an option
RIVET HEAD DRILLING TOOL, B6-31
Rivet Head Drilling Tool
$37.95
Angled view of AK-Builder steel Rail Alignment Fixture showing front clamp and screw.
AK-Builder Rail Alignment Fixture
$29.95
GAS PORT DRILL BIT, C7-21
Gas Port Drill Bit
$8.95
AK-Builder Trigger Guard Riveting Jig, black oxide finish, with detached components.
AK47 Trigger Guard Riveting Jig
$85.00
5/32" .1563" SCREW MACHINE DRILL BIT, C1-72
5/32" .1563" Screw Machine Drill Bit
$2.95
AK-Builder Barrel Press Kit components: black oxided rams, brass block, and trunnion blocks.
AK-Builder Barrel Press Kit
$139.95
Select an option
Red Star Arms FCG pin retaining plate, dark heat-treated steel, side view.
Red Star Arms FCG Pin Retaining Plate
$4.95
AK-Builder riveting press, black-finished, showing main unit, assorted dies and supports.
AK-Builder Rivet Tool
$270.00