Home/Drills and Taps/5/32" .1563" Screw Machine Drill Bit

CODE: C1-72

5/32" .1563" Screw Machine Drill Bit

$2.95

Description
Related Products
Reviews

These are the same drills I use in the Rivet Drilling tool, drilling gas piston rivet holes and for drilling holes for the 4mm rivet holes in receivers.

These are screw machine length drill bits with 135 degree split points to keep drill walk and bending to a minimum. The junk drills from Home Depot, Harbor Freight and most hardware stores are jobber length with 118 degree points that bend and walk more.

Angled view of two uncoated high-speed steel 5mm and 7mm reamers for AK receiver pins.

Quick view

$44.95

5mm & 7mm Reamer Set

5 mm and 7 mm reamer set for finishing AK hammer and trigger pin holes. Use slow speed with cutting oil.

CODE: A2-31

Availability: In Stock

Quantity:

+ −

AK-Builder AK Rivet Set, black oxide coated, showing various lengths and head styles.

Quick view

$14.00

AK-Builder AK Rivet Set

PSL/FPK

The new long rear trunnion rivets have a slightly shorter head and the cupped tool that supports the rivets will need to be sanded down to keep the...

CODE: A0-11

Availability: In Stock

Select an option

Quick view

$8.95

Gas Port Drill Bit

These are the drill bits I use for drilling 7.62 gas ports. These will fit into the port and it will guide the drill. Just press the gas block...

CODE: C7-21

Availability: In Stock

Quantity:

+ −

#16 .177" SCREW MACHINE DRILL BIT, C1-71

Quick view

$4.95

#16 .177" Screw Machine Drill Bit

This drill is used for drilling holes for the 4.5mm rivet holes in the bent receivers as well as opening the hammer pin hole on my flats before reaming to...

CODE: C1-71