816-229-0804
Small blue one-inch capacity C-clamp with metallic screw.
One Inch Capacity C-Clamp
$375

One Inch Capacity C-Clamp

C5-12
Description

Small C-Clamp for installing the lower rails in your receiver or for clamping the scribe jig to the bent receiver to mark the cutouts of the top rail.

Related Products
AK-Builder rail alignment fixture — positions and clamps lower bolt guide rails in stamped receivers for accurate welding and alignment.
$2995
In Stock
+ −
Here is a professional tool for drilling the front and rear trunnion holes in AK47 receivers.  This tool will work with 7.62 and 5.45 trunnions using two different expanding mandrels that fit into the trunnion.  The red mandrel fits the 7.62 and the blue fits the 5.45.  The...
$9995
In Stock
+ −
0.0
A2-31
5 mm and 7 mm reamer set for finishing AK hammer and trigger pin holes. Use slow speed with cutting oil.
$4495
In Stock
+ −
Two inch C-Clamp for clamping trunnions for test fitting parts to your rifle before final installation.
$495
In Stock
+ −
AK-Builder Center Support & Rivet — Bulgarian-Style (No Flat) Modern, builder-proven center support set patterned after Bulgarian receivers. The sleeve is round (no flat) by design for correct mag-well clearance, machined from alloy steel and heat treated for strength and...
$700
In Stock
+ −
0.0
A1-41
This spot welder tong is designed to work with the Harbor Freight #45689 welder or 61205-61206 if you get the extended tip . Avoid the 220v welder if at all possible due to the possibility of burn through while welding. The tong will come with a screw-on tip that can be replaced...
$4595
In Stock
+ −
Reviews

No reviews found

  • Recently Viewed
  • Related Products
  • On Sale
 
Fast, Reliable Shipping

We ship orders quickly and reliably throughout the United States.

Quality You Can Count On

We stand behind the quality of every product we sell.

30-Day Returns

Not satisfied with your purchase? Returns are accepted within 30 days.