816-229-0804

Home/Drills and Taps/Gas Port Drill Bit

Gas Port Drill Bit

Write a review

$9⁹⁵

Add to Cart

Gas Port Drill Bit

Name: Gas Port Drill Bit
SKU: C7-21
Price: 9.95 USD
Availability: InStock

CODE:

C7-21

Write a review

$9⁹⁵

In Stock

+ −

Add to wish list Ask a question

Description

These are the drill bits I use for drilling 7.62 gas ports. These will fit into the port and it will guide the drill. Just press the gas block on first. This works on the Romanian and AMD65 style (45 degree)gas blocks. The Bulgarian 74 gas port holes are smaller and need a shorter drill bit.

Size: 0.1285"

Wire #30

Flute Length: 1-5/8"

Overall Length: 6"

Material: Cobalt

Point Angle°: 135

Related Products

Angled view of two uncoated high-speed steel 5mm and 7mm reamers for AK receiver pins.

5mm & 7mm Reamer Set

0.0

CODE:

A2-31

5 mm and 7 mm reamer set for finishing AK hammer and trigger pin holes. Use slow speed with cutting oil.

$44⁹⁵

In Stock

Quantity:

+ −

AK-Builder AK Rivet Set

(Reviews: 1)

CODE:

A0-61

The new long rear trunnion rivets have a slightly shorter head and the cupped tool that supports the rivets will need to be sanded down to keep the tool from touching the receiver. Be sure to check this before installing the new black rivets. These have the correct swell...

Options

AKM Fixed Stock Romanian RPK PSL/FPK Polish Tantal Korean Type 68 Underfolder Chinese Mak 90 Bulgarian RPK 74 Yugo M70 1.5mm Underfolder Yugo M70/M72 Fixed Stock Yugo M92/M70 1mm Underfolder +3

OptionsAKM Fixed Stock

$9⁰⁰

In Stock

Quantity:

+ −

Add to Cart

.300" Barrel Pin Reamer

0.0

CODE:

A2-32

This is the same reamer we use to work with the .302 barrel pin holes. Drill the hole first with a 7mm drill then ream the hole. The reamer has more flutes than a drill and makes a more precise hole. Be sure the chuck on your drill has the least amount of wobble as possible to...

$39⁹⁵

Quantity:

+ −

AK Trunnion Rivet Hole Drilling Fixture

(Reviews: 1)

CODE:

T3-11

Here is a professional tool for drilling the front and rear trunnion holes in AK47 receivers. This tool will work with 7.62 and 5.45 trunnions using two different expanding mandrels that fit into the trunnion. The red mandrel fits the 7.62 and the blue fits the 5.45. The...