816-229-0804
Categories
Close-up of drilled .076" gas port on Bulgarian AK74 gas block.
Cobalt Gas Port Drill for Bulgarian AK74's
Write a review
$495
Add to Cart

Cobalt Gas Port Drill for Bulgarian AK74's

C4-23
Write a review
+ −
Add to wish list Ask a question
Description

This drill is .076" and the original port size is .077". More than likely with a cheap drill press or hand drill the bit will cut oversize so it won't really matter. The original hole looks to be drilled with a .156" or 4mm spot drill then drilled with the smaller drill bit. 

All the drills that I buy are the screw machine style which is shorter and will flex less than normal jobber drills that you buy from the hardware store.

The picture doesn't show the drill, but only the drill will be sent not the gas block obviously.  The picture shows how the hole should look after drilling.

Related Products
Gas Port Drill Bit
0.0
C7-21
These are the drill bits I use for drilling 7.62 gas ports.  These will fit into the port and it will guide the drill.  Just press the gas block on first.  This works on the Romanian and AMD65 style (45 degree)gas blocks.  The Bulgarian 74 gas port holes are smaller and need...
$995
In Stock
+ −
5mm & 7mm Reamer Set
0.0
A2-31
5 mm and 7 mm reamer set for finishing AK hammer and trigger pin holes. Use slow speed with cutting oil.
$4495
In Stock
+ −
.300" Barrel Pin Reamer
0.0
A2-32
This is the same reamer we use to work with the .302 barrel pin holes.  Drill the hole first with a 7mm drill then ream the hole.  The reamer has more flutes than a drill and makes a more precise hole.  Be sure the chuck on your drill has the least amount of wobble as possible to...
$3995
+ −
AK-Builder AK Rivet Set
5
(Reviews: 1)
A0-61
The new long rear trunnion rivets have a slightly shorter head and the cupped tool that supports the rivets will need to be sanded down to keep the tool from touching the receiver.  Be sure to check this before installing the new black rivets. These have the correct swell...
Options
AKM Fixed Stock Romanian RPK PSL/FPK Polish Tantal Korean Type 68 Underfolder Chinese Mak 90 Bulgarian RPK 74 Yugo M70 1.5mm Underfolder Yugo M70/M72 Fixed Stock Yugo M92/M70 1mm Underfolder +3
OptionsAKM Fixed Stock
$900
In Stock
+ −
Add to Cart
AK Trunnion Rivet Hole Drilling Fixture
5
(Reviews: 1)
T3-11
Here is a professional tool for drilling the front and rear trunnion holes in AK47 receivers.  This tool will work with 7.62 and 5.45 trunnions using two different expanding mandrels that fit into the trunnion.  The red mandrel fits the 7.62 and the blue fits the 5.45.  The...
$9995
In Stock
+ −
Add to Cart
5/32" .1563" Screw Machine Drill Bit
0.0
C1-72
These are the same drills I use in the Rivet Drilling tool, drilling gas piston rivet holes and for drilling holes for the 4mm rivet holes in receivers. These are screw machine length drill bits with 135 degree split points to keep drill walk and bending to a minimum. The junk drills from...
$295
+ −
Reviews

No reviews found

  • Recently Viewed
  • Related Products
  • On Sale
 
Fast, Reliable Shipping

We ship orders quickly and reliably throughout the United States.

Quality You Can Count On

We stand behind the quality of every product we sell.

30-Day Returns

Not satisfied with your purchase? Returns are accepted within 30 days.