0 Cart
A4-11
In Stock

Die Starter 14-1 LH

$15.00
Write a review
+ −
Add to wish list Compare
DIE STARTER 14-1 LH, A4-11

Die Starter 14-1 LH

$15.00

Die Starter for 14-1 LH 7.62x39 rifles.

Angled view of two uncoated high-speed steel 5mm and 7mm reamers for AK receiver pins.
$44.95
5mm & 7mm Reamer Set

5 mm and 7 mm reamer set for finishing AK hammer and trigger pin holes. Use slow speed with cutting oil.

A2-31
In Stock
+ −
RIVET HEAD DRILLING TOOL, B6-31
$37.95
Rivet Head Drilling Tool

Rivet head drilling tool — heat-treated steel, includes 5/32" drill bit. Designed for removing trunnion rivets from AK parts kits.

B6-31
In Stock
+ −
.300 BARREL PIN REAMER, A2-32
$36.95
.300 Barrel Pin Reamer
This is the same reamer we use to work with the .302 barrel pin holes.  Drill the hole first with a 7mm drill then ream the hole.  The reamer has...
A2-32
+ −
AK-Builder AK Trunnion Rivet Hole Drilling Fixture with red 7.62mm and blue 5.45mm mandrels.
$99.95
AK Trunnion Rivet Hole Drilling Fixture
Here is a professional tool for drilling the front and rear trunnion holes in AK47 receivers.  This tool will work with 7.62 and 5.45 trunnions...
T3-11
In Stock
 
Select an option
GAS PORT DRILL BIT, C7-21
$8.95
Gas Port Drill Bit
These are the drill bits I use for drilling 7.62 gas ports.  These will fit into the port and it will guide the drill.  Just press the gas block...
C7-21
In Stock
+ −
DIE HANDLE FOR 1.5" THREADING DIES, C3-51
$10.95
Die Handle for 1.5" Threading Dies
This is used with our 12-1.25 dies sold on the website.
C3-51
In Stock
+ −

No reviews found

Customers Also Bought

Angled view of two uncoated high-speed steel 5mm and 7mm reamers for AK receiver pins.
5mm & 7mm Reamer Set
$44.95
RIVET HEAD DRILLING TOOL, B6-31
Rivet Head Drilling Tool
$37.95
.300 BARREL PIN REAMER, A2-32
.300 Barrel Pin Reamer
$36.95
AK-Builder AK Trunnion Rivet Hole Drilling Fixture with red 7.62mm and blue 5.45mm mandrels.
AK Trunnion Rivet Hole Drilling Fixture
$99.95
Select an option
GAS PORT DRILL BIT, C7-21
Gas Port Drill Bit
$8.95
DIE HANDLE FOR 1.5" THREADING DIES, C3-51
Die Handle for 1.5" Threading Dies
$10.95
AK-Builder AK Rivet Set, black oxide coated, showing various lengths and head styles.
AK-Builder AK Rivet Set
$9.00
Select an option
Angled view of AK-Builder steel Rail Alignment Fixture showing front clamp and screw.
AK-Builder Rail Alignment Fixture
$29.95
Red Star Arms FCG pin retaining plate, dark heat-treated steel, side view.
Red Star Arms FCG Pin Retaining Plate
$4.95
AK-Builder PSL Brass Barrel Press Puck, circular brass, top view.
PSL Brass Barrel Press Puck
$9.95
AK-Builder Barrel Press Kit components: black oxided rams, brass block, and trunnion blocks.
AK-Builder Barrel Press Kit
$139.95
Select an option
AK-BUILDER FRONT SIGHT & GAS BLOCK SUPPORT, C8-11
AK-Builder Front Sight & Gas Block Support
$29.95