Cart is empty
Ak-Builder 4mm Finish Pin Punch
N-15
In Stock
Please sign in so that we can notify you about a reply
This punch is used for the 4mm pin to drive it completely out of the rear sight. It is best to use a starter length punch to get the pin to move otherwise it you will bend the punch if the pin is tight in the sight block.
We designed these punches for demilling parts kits in our shop and use them daily. These can be bought as a set or individually.
The problem with buying regular punches is that you have to cut them down to make a starter punch to get the 3mm and 4mm pins to start moving. Once they start then punching them out the rest of the way with a longer punch usually is the easier part. The punches have a hex head with an o-ring so you can use a 7/16" wrench to hold the punch without having to worry about hitting yourself when trying to get the pin started to move.
The punches are made of tool steel and heat treated then black oxided. Be sure to wear eye protection when using any punch.
No reviews found