0 Cart
D8-41
In Stock

16" Type 3 Milled 7.62x39 Non-Chrome Barrel 26mm x 1.5 RH trunnion threads

$179.95
Write a review
+ −
Add to wish list Compare
Type 3 Milled NON-CHROME 7.62x39 Barrel 26mm x 1.5 RH Trunnion Threads

16" Type 3 Milled 7.62x39 Non-Chrome Barrel 26mm x 1.5 RH trunnion threads

$179.95

Type 3 Non Chrome Lined Barrel 16.330" reference length.  Trunnion threads are 26m-1.5 right hand with a 14-1lh threaded muzzle.

The Russians marked the original barrels 1-5 depending on the headspace.  This distance was measured from the back of the headspace gauge to the barrel shoulder that seats against the trunnion.  All of our barrels have been turned as #1's which is the shortest allowable distance.  This will give the builder plenty of room should they need to adjust the depth by facing off material from the shoulder to thread deeper into the trunnion.  The barrels DO NOT have the handguard retainer cuts nor the extractor clearance cuts.  These will need to be done after setting the headspace.

These barrels are in WHITE

These are made from 4150 steel. 

Stamped USA 7.62

Country:
USA
Options:
Non-Chrome
AK-Builder AK Rivet Set, black oxide coated, showing various lengths and head styles.
$9.00
AK-Builder AK Rivet Set
AKM Fixed Stock
The new long rear trunnion rivets have a slightly shorter head and the cupped tool that supports the rivets will need to be sanded down to keep the...
A0-61
In Stock
 
Select an option
AK47 BULLET GUIDE RIVET, A3-12
$3.25
AK47 Bullet Guide Rivet
This rivet is used for installing the bullet guide onto a trunnion.
A3-12
In Stock
+ −
AK-BUILDER MAG CATCH SPRING, A2-25
$2.50
AK-Builder Mag Catch Spring
New production magazine catch spring.
A2-25
In Stock
+ −
  • Save 10%
Type 3 Milled 7.62x39 Chrome Lined Barrel
$269.95 $299.95
16" Type 3 Milled 7.62x39 Chrome lined Barrel 26mm x 1.5 RH trunnion threads
USA, Chrome Lined
Type 3 Chrome Lined Barrel 16.330" reference length.  Trunnion threads are 26mm-1.5 right hand with a 14-1lh threaded muzzle. The Russians marked...
D8-51
In Stock
 
Select an option
GAS PORT DRILL BIT, C7-21
$8.95
Gas Port Drill Bit
These are the drill bits I use for drilling 7.62 gas ports.  These will fit into the port and it will guide the drill.  Just press the gas block...
C7-21
In Stock
+ −
Pair of heat treated milled receiver front and rear cover plates, in the white.
$24.95
Milled Receiver Front and Rear Cover Plates
Brand new milled receiver front and rear cover plates. Sold as a PAIR. These are heat treated and ready to be painted and installed. Some slight trimming or...
C2-31
In Stock
+ −

No reviews found

Customers Also Bought

AK-Builder AK Rivet Set, black oxide coated, showing various lengths and head styles.
AK-Builder AK Rivet Set
$9.00
Select an option
AK47 BULLET GUIDE RIVET, A3-12
AK47 Bullet Guide Rivet
$3.25
AK-BUILDER MAG CATCH SPRING, A2-25
AK-Builder Mag Catch Spring
$2.50
Save 10% Type 3 Milled 7.62x39 Chrome Lined Barrel
16" Type 3 Milled 7.62x39 Chrome lined B...
$299.95 $269.95
Select an option
GAS PORT DRILL BIT, C7-21
Gas Port Drill Bit
$8.95
Pair of heat treated milled receiver front and rear cover plates, in the white.
Milled Receiver Front and Rear Cover Plates
$24.95
AK-Builder Flat Bending Die Set: machined steel punch, alignment pins, receiver flat, and base.
AK-Builder Flat Bending Die Set
$349.95
Select an option
Save 5% Angled view of AK-Builder 7.62x39mm Russian spec uncoated steel headspace gauge.
7.62x39 Headspace Gauge
$43.95 $41.95
Select an option
Side view of 1.5mm heat treated 4130 steel center support and rivet, in the white.
1.5mm Center Support and Rivet
$7.00
AK TRIGGER GUARD RIVET SET, C11-13
AK Trigger Guard Rivet Set
$5.00
Select an option
Close-up of three dark finished AK-47 scope rail rivets, arranged vertically.
AK-47 Scope Rail Rivets
$3.95
AK-74 SCOPE RAIL RIVETS, C12-64
AK-74 Scope Rail Rivets
$3.95